Influence of an annealing heat treatment on the microstructure, ductility, and corrosion resistance of a chromated 55 wt.% Al-Zn coated steel sheet

被引：0
|
作者：
T. M. C. Nogueira
M. A. S. Cruz
P. R. Rios
机构：
[1] Universidade Federal Fluminense,Escola de Engenharia Industrial Metalúrgica de Volta Redonda
来源：
Journal of Materials Engineering and Performance | 2001年 / 10卷
关键词：
55% Al-Zn coating; coated steel sheet; corrosion;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effect of an annealing heat treatment on both the ductility and corrosion resistance of a chromated hot-dip 55 mass% Al-Zn coated steel sheet is investigated. The present results suggest that the heat treatment improves coating ductility but impairs the overall corrosion resistance due to a decrease in the protective effect of the passivation layer and possibly due to the decrease in the amount of interdendritic zinc. Based on these results, it is concluded that the benefits of the heat treatment to improve ductility have to be carefully assessed with reference to the intended application due to its adverse effect on the corrosion resistance.
引用
收藏
页码：314 / 319
页数：5
相关论文
共 50 条
  • [31] Research on coating microstructure and corrosion behavior of galvanized Zn-Al-Mg coated steel sheet
    Lu, Jia-Shun
    Li, Feng
    Yang, Hong-Gang
    Kang, Yong-Lin
    Cailiao Gongcheng/Journal of Materials Engineering, 2012, (10): : 89 - 93
  • [32] Influence of heat treatment on the microstructure and corrosion resistance of martensitic stainless steel
    Boesing, Ingmar
    Cramer, Lena
    Steinbacher, Matthias
    Zoch, Hans Werner
    Thoeming, Jorg
    Baune, Michael
    AIP ADVANCES, 2019, 9 (06)
  • [33] Effect of Environmental Conditions on the Corrosion near Shear Cut Edge of 55 mass% Al-Zn Alloy Coated Steel Sheets
    Matsumoto, Masamitsu
    Okada, Nobuhiro
    Nishihara, Katsuhiro
    Kimoto, Masanari
    Kudo, Takeo
    Fujimoto, Shinji
    ISIJ INTERNATIONAL, 2011, 51 (03) : 462 - 470
  • [34] PAINTABILITY AND CORROSION-RESISTANCE OF ZN-5-PERCENT-AL-MG COATED STEEL SHEET
    YAMAJI, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S452 - S452
  • [35] Influence of Heat Treatment on the Microstructure and Corrosion Resistance of 13 Wt Pct Cr-Type Martensitic Stainless Steel
    Si-Yuan Lu
    Ke-Fu Yao
    Yun-Bo Chen
    Miao-Hui Wang
    Xue-Yuan Ge
    Metallurgical and Materials Transactions A, 2015, 46 : 6090 - 6102
  • [36] Influence of Heat Treatment on the Microstructure and Corrosion Resistance of 13 Wt Pct Cr-Type Martensitic Stainless Steel
    Lu, Si-Yuan
    Yao, Ke-Fu
    Chen, Yun-Bo
    Wang, Miao-Hui
    Ge, Xue-Yuan
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (12): : 6090 - 6102
  • [37] Roles of Al and Mg on the Microstructure and Corrosion Resistance of Zn-Al-Mg Hot-Dipped Coated Steel
    Guo, Taixiong
    Wang, Yuhao
    Yu, Liusi
    Jin, Yongqing
    Zeng, Bitao
    Dou, Baojie
    Liu, Xiaoling
    Lin, Xiuzhou
    MATERIALS, 2024, 17 (07)
  • [38] Influence of Alloy Content on Microstructure and Corrosion Resistance of Zn-based Alloy Coated Steel Product
    Lee, Jae-Won
    Kim, Sung-Jin
    Oh, Min-Suk
    KOREAN JOURNAL OF METALS AND MATERIALS, 2020, 58 (03): : 169 - 174
  • [39] Perspective on "Atmospheric Corrosion Resistance of Skyward- and Groundward-Exposed Surfaces of Zinc- and 55% Al-Zn Alloy-Coated Steel Sheet,"HE Townsend, Corrosion 54, 7 (1998): p.561-565
    Dean, Sheldon W., Jr.
    CORROSION, 2019, 75 (04) : 328 - 329
  • [40] Study on Corrosion Resistance of Zn-Al Alloy Coated with Zeolitic Imidazolate Framework-67 Film in 3.5 wt.% NaCl Solution
    Haibo Wang
    Yanling Wang
    Baoyi Ren
    Xuejun Zhang
    Journal of Materials Engineering and Performance, 2020, 29 : 1043 - 1050
12345