Optimization of rheological properties of binders used in vacuum assisted resin transfer molding of fiberglass

被引：0
|
作者：
Borodulin A.S. [1 ]
Malysheva G.V. [1 ]
Romanova I.K. [1 ]
机构：
[1] Bauman Moscow State Technical University, Moscow
来源：
Polymer Science Series D | 2015年 / 8卷 / 4期
关键词：
active solvent; epoxy binder; optimization; Pareto criterion; polymer composite materials;
D O I：
10.1134/S1995421215040036
中图分类号：
学科分类号：
摘要：
The effect of an active solvent such as diethylene glycol on the thermal stability and the rheological and strength properties of epoxy binder was studied. The composition of the binder was optimized according to the Pareto criterion and the optimum content of active solvent was found. Viscosity, ultimate bending strength, and ultimate tensile strength were the parameters used in the optimization process. © 2015, Pleiades Publishing, Ltd.
引用
收藏
页码：300 / 303
页数：3
相关论文
共 50 条
  • [31] Capillary effects in vacuum-assisted resin transfer molding with natural fibers
    Francucci, Gaston
    Vazquez, Analia
    Ruiz, Edu
    Rodriguez, Exequiel S.
    POLYMER COMPOSITES, 2012, 33 (09) : 1593 - 1602
  • [32] Development of a novel processing technique for Vacuum Assisted Resin Transfer Molding (VARTM)
    Rigas, EJ
    Walsh, SM
    Spurgeon, WA
    2001: A MATERIALS AND PROCESSES ODYSSEY, BOOKS 1 AND 2, 2001, 46 : 1086 - 1094
  • [33] Manufacture of bulk magnetorheological elastomers using vacuum assisted resin transfer molding
    Woods, B. K. S.
    Wereley, N.
    Hoffmaster, R.
    Nersessian, N.
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2007, 21 (28-29): : 5010 - 5017
  • [34] Mechanical properties of the cured laminates on the hot-press tackified preforms in vacuum assisted resin transfer molding
    Changchun Wang
    Jinrui Ye
    Guangquan Yue
    Guanghui Bai
    Ling Liu
    Boming Zhang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2018, 33 : 242 - 248
  • [35] Mechanical Properties of the Cured Laminates on the Hot-press Tackified Preforms in Vacuum Assisted Resin Transfer Molding
    王长春
    叶金蕊
    YUE Guangquan
    BAI Guanghui
    LIU Ling
    ZHANG Boming
    JournalofWuhanUniversityofTechnology(MaterialsScience), 2018, 33 (01) : 242 - 248
  • [36] Mechanical Properties of the Cured Laminates on the Hot-press Tackified Preforms in Vacuum Assisted Resin Transfer Molding
    Wang Changchun
    Ye Jinrui
    Yue Guangquan
    Bai Guanghui
    Liu Ling
    Zhang Boming
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2018, 33 (01): : 242 - 248
  • [37] Resin flow monitoring in vacuum assisted resin transfer molding using optical fiber distributed sensor
    Eum, Soohyun
    Kageyama, Kazuro
    Murayama, Hideaki
    Ohsawa, Isamu
    Uzawa, Kiyoshi
    Kanai, Makoto
    Igawa, Hirotaka
    BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL AND COMPOSITE MATERIALS 2007, 2007, 6526
  • [38] Modeling and evaluation of the filling process of vacuum-assisted compression resin transfer molding
    Chang, Chih-Yuan
    JOURNAL OF POLYMER ENGINEERING, 2013, 33 (03) : 211 - 219
  • [39] Comparison of in-plane resin transfer molding and vacuum-assisted resin transfer molding 'effective' permeabilities based on mold filling experiments and simulations
    Hancioglu, Mert
    Sozer, E. Murat
    Advani, Suresh G.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2020, 39 (1-2) : 31 - 44
  • [40] Numerical model of relaxation during vacuum-assisted resin transfer molding (VARTM)
    Walsh, SM
    Freese, CE
    POLYMER COMPOSITES, 2005, 26 (05) : 628 - 635
12345