248 nm excimer laser drilling PI film for nozzle plate application

被引：0
|
作者：
C. T. Pan
H. Yang
M. K. Wei
机构：
[1] National Sun Yat-Sen University,Department of Mechanical and Electro
[2] National Chung Hsing University,Mechanical Engineering, and Center for Nanoscience & Nanotechnology
[3] National Dong Hwa University,Institute of Precision Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2007年 / 34卷
关键词：
248 nm excimer laser; Microholes; Nozzle plate; PI;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study, drilling of polyimide (PI) film by using a 248 nm excimer laser through photomask projection is presented. The parameter effects of laser fluence, shot number and repetition rate on the processing results are realized. A high-quality of microhole array with 50 μm thick PI film has been fabricated. When the projection process is carried out, differences in the diameters of the microhole in the front and back sides of the PI are observed, which cause a conical shape in the kerf. The formation of this conical shape in terms of laser process parameters is discussed. Besides, to improve the laser machining quality of PI microholes, the effects of the process parameters are investigated and characterized. In addition, before excimer laser drilling PI is conducted, the PI surface is pre-coated with, or left without, a thin film material to observe the formation of debris. The results shows that the formation of debris can be reduced significantly when a pre-coated thin film is applied on the PI surface.
引用
收藏
页码：889 / 897
页数：8
相关论文
共 50 条
  • [1] 248 nm excimer laser drilling PI film for nozzle plate application
    Pan, C.T.
    Yang, H.
    Wei, M.K.
    1600, Springer London Ltd, The Guildway, Old Portsmouth Road, Artington, Guildford, GU3 1LP, United Kingdom (34): : 9 - 10
  • [2] 248 nm excimer laser drilling PI film for nozzle plate application
    Pan, C. T.
    Yang, H.
    Wei, M. K.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 34 (9-10): : 889 - 897
  • [3] EXCIMER-LASER (248 NM) DRILLING OF TOOTH TISSUE - PRELIMINARY INVESTIGATION
    PATEL, BCM
    MOSS, J
    PEARSON, GJ
    LASERS IN MEDICAL SCIENCE, 1994, 9 (04) : 243 - 248
  • [4] PET polymer ablation using excimer laser for nozzle plate application
    Pan, C.-T.
    Yang, H.
    Wei, M.-K.
    Chang, F.-Y.
    MATERIALS SCIENCE AND TECHNOLOGY, 2007, 23 (08) : 980 - 986
  • [5] Preionization of XeF excimer laser by 248 nm laser beam
    Maulhardt, G.
    Schmidt, K.
    Bartuch, U.
    Vioel, W.
    LASER PHYSICS LETTERS, 2007, 4 (01) : 33 - 37
  • [6] Experimental study of 248nm excimer laser etching of alumina
    Hu, Hongtao
    Shao, Jingzhen
    Wang, Xi
    Fang, Xiaodong
    ADVANCED LASER MANUFACTURING TECHNOLOGY, 2016, 10153
  • [7] Microprocessing of organic material for semiconductor packaging by 248 nm excimer laser
    Suwa, Akira
    Fujimoto, Junichi
    Kawasuji, Yasufumi
    Kobayashi, Masakazu
    Shimbori, Masashi
    Onose, Takashi
    Arakawa, Masaki
    Mizutani, Akira
    Mizoguchi, Hakaru
    LASER-BASED MICRO- AND NANOPROCESSING XIII, 2019, 10906
  • [8] DEEP UV ANR PHOTORESISTS FOR 248 NM EXCIMER LASER PHOTOLITHOGRAPHY
    THACKERAY, JW
    ORSULA, GW
    PAVELCHEK, EK
    CANISTRO, D
    BOGAN, LE
    BERRY, AK
    GRAZIANO, KA
    ADVANCES IN RESIST TECHNOLOGY AND PROCESSING VI, 1989, 1086 : 34 - 47
  • [9] Femtosecond ultraviolet (248 nm) excimer laser processing of Teflon (PTFE)
    Adhi, KP
    Owings, RL
    Railkar, TA
    Brown, WD
    Malshe, AP
    APPLIED SURFACE SCIENCE, 2003, 218 (1-4) : 17 - 23
  • [10] INTERACTION BETWEEN KRF (248 NM) EXCIMER LASER AND POLYMETHYLMETHACRYLATE TARGET
    GIRAULT, C
    DAMIANI, D
    CHAMPEAUX, C
    AUBRETON, J
    CATHERINOT, A
    ANNALES DE PHYSIQUE, 1990, 15 (03) : 93 - 95
12345