Production of high-manganese steel in arc furnaces. Part 2

被引：0
|
作者：
Vdovin K.N. [1 ]
Feoktistov N.A. [1 ]
Sinitskii E.V. [1 ]
Gorlenko D.A. [1 ]
Durov N.A. [2 ]
机构：
[1] Nosov Magnitogorsk State Technical University, Magnitogorsk
[2] Moscow Institute of Steel and Alloys, Moscow
来源：
Steel in Translation | 2016年 / 46卷 / 01期
关键词：
alloying with vanadium; argon injection; bulk content; calcium–strontium carbonate; impact strength; ladle treatment; nonmetallic inclusions;
D O I：
10.3103/S0967091216010150
中图分类号：
学科分类号：
摘要：
Metallographic data are presented for manganese steel before and after ladle treatment—specifically, treatment with calcium–strontium carbonate or argon injection in the ladle or both. Quantitative analysis of the nonmetallic inclusions is undertaken. The position of the inclusions relative to the grain boundaries is determined. Electron microscopy permits detailed study of the composition and form of the inclusions that appear during ladle treatment and without such treatment. The influence of various types of ladle treatment on the impact strength of manganese steel is discussed. Alloying of the manganese steel with vanadium is considered. Practical data regarding the influence of alloying with vanadium on the impact strength of the manganese steel are presented. © 2016, Allerton Press, Inc.
引用
收藏
页码：16 / 20
页数：4
相关论文
共 50 条
  • [41] Fatigue properties of high-manganese steel at cryogenic temperatures
    Mizoguchi, Takao
    Yamamoto, Susumu
    Shimada, Masao
    Tsukuda, Jungi
    Akamatsu, Masaaki
    KOBELCO Technology Review, 1988, (04): : 31 - 34
  • [42] SOLUTIONING OF HIGH-MANGANESE STEEL CASTINGS IN SALT BATHS
    STAVISYUK, GL
    SHERSTYUK, AA
    TUMANSKII, BF
    METAL SCIENCE AND HEAT TREATMENT, 1977, 19 (1-2) : 109 - 110
  • [43] Microstructure of Cast High-Manganese Steel Containing Titanium
    Tecza, G.
    Garbacz-Klempka, A.
    ARCHIVES OF FOUNDRY ENGINEERING, 2016, 16 (04) : 163 - 168
  • [44] DEVELOPMENT OF HIGH-MANGANESE STEEL FOR HEAVY HAUL RAILWAYS
    GHORESHY, H
    MACKAY, BF
    SMITH, RW
    CIM BULLETIN, 1984, 77 (866): : 44 - 44
  • [45] KINETICS OF PRECIPITATION HARDENING OF HIGH-MANGANESE AUSTENITIC STEEL
    KRIZ, J
    CHAP, A
    PETSA, P
    METAL SCIENCE AND HEAT TREATMENT, 1980, 22 (5-6) : 318 - 321
  • [46] Complex Structural Effects in Deformed High-Manganese Steel
    Kowalska, Joanna
    Rys, Janusz
    Cempura, Grzegorz
    MATERIALS, 2021, 14 (22)
  • [47] NOTE ON MICROHARDNESS DETERMINATIONS IN HIGH-MANGANESE AUSTENITIC STEEL
    YANTSEN, GI
    RASKOLENKO, LG
    NOVOMEISKII, YD
    INDUSTRIAL LABORATORY, 1971, 37 (12): : 1938 - +
  • [48] Recrystallization behavior of a high-manganese steel: Experiments and simulations
    Haase, Christian
    Kuehbach, Markus
    Barrales-Mora, Luis A.
    Wong, Su Leen
    Roters, Franz
    Molodov, Dmitri A.
    Gottstein, Guenter
    ACTA MATERIALIA, 2015, 100 : 155 - 168
  • [49] EVALUATION OF THE ENERGETIC PERFORMANCES OF ARC FURNACES FOR THE PRODUCTION OF STEEL
    BORRONI, A
    JOPPOLO, CM
    MAZZA, B
    NANO, G
    ELETTROTECNICA, 1983, 70 (01): : 91 - 91
  • [50] Problems in Design and Construction of High Power Transformers for Electric Arc Melting Furnaces.
    Ikanovic, Juso
    1600, (50):
12345