Study on the Pyrolysis of Cellulose for Bio-Oil with Mesoporous Molecular Sieve Catalysts

被引:0
|
作者
Feng-wen Yu
Deng-xiang Ji
Yong Nie
Yao Luo
Cheng-jie Huang
Jian-bing Ji
机构
[1] Zhejiang University of Technology,Zhejiang Province Key Laboratory of Biofuel, College of Chemical Engineering and Materials Science
[2] Zhejiang University of Technology,Zhejiang Province Key Laboratory of Biofuel, College of Chemical Engineering and Materials Science
来源
关键词
Catalytic pyrolysis; Mesoporous molecular sieve catalysts; Cellulose; Bio-oil;
D O I
暂无
中图分类号
学科分类号
摘要
Mesoporous materials possess a hexagonal array of uniform mesopores, high surface areas, and moderate acidity. They are one of the important catalysts in the field of catalytic pyrolysis. In this paper, mesoporous materials of Al-MCM-41, La-Al-MCM-41, and Ce-Al-MCM-41 were synthesized, characterized, and tested as catalysts in the cellulose catalytic pyrolysis process using a fixed bed pyrolysis reactor. The results showed that mesoporous materials exhibited a strong influence on the pyrolytic behavior of cellulose. The presence of these mesoporous molecular sieve catalysts could vary the yield of products, which was that they could decrease the yield of liquid and char and increase the yield of gas product, and could promote high-carbon chain compounds to break into low-carbon chain compounds. Mesoporous molecular sieve catalysts were benefit to the reaction of dehydrogenation and deoxidation and the breakdown of carbon chain. Further, La-Al-MCM-41 and Ce-Al-MCM-41 catalysts can produce more toluene and 2-methoxy-phenol, as compared to the non-catalytic runs.
引用
收藏
页码:174 / 182
页数:8
相关论文
共 50 条
  • [21] Biomass pyrolysis polygeneration with bio-oil recycling: Co-pyrolysis of heavy bio-oil and pine wood leached with light bio-oil for product upgradation
    Cen, Kehui
    Zhuang, Xiaozhuang
    Gan, Ziyu
    Zhang, Hong
    Chen, Dengyu
    FUEL, 2023, 335
  • [22] Advances in design of heterogeneous catalysts for pyrolysis of lignocellulosic biomass and bio-oil upgrading
    Grams, Jacek
    Jankowska, Agata
    Goscianska, Joanna
    MICROPOROUS AND MESOPOROUS MATERIALS, 2023, 362
  • [23] COMPARISON OF SULPHIDED AND NON-SULPHIDED CATALYSTS FOR PYROLYSIS BIO-OIL HYDROTREATING
    Shumeiko, B.
    Vrtiska, D.
    Simacek, P.
    Kubicka, D.
    PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON CHEMICAL TECHNOLOGY (ICCT), 2018, : 220 - 225
  • [24] Catalytic pyrolysis of corn straw for deoxygenation of bio-oil with different types of catalysts
    Wenkai Zhang
    Ze Wang
    Tengze Ge
    Cuiguang Yang
    Wenli Song
    Songgeng Li
    Rui Ma
    Korean Journal of Chemical Engineering, 2022, 39 : 1240 - 1247
  • [25] Catalytic pyrolysis of corn straw for deoxygenation of bio-oil with different types of catalysts
    Zhang, Wenkai
    Wang, Ze
    Ge, Tengze
    Yang, Cuiguang
    Song, Wenli
    Li, Songgeng
    Ma, Rui
    KOREAN JOURNAL OF CHEMICAL ENGINEERING, 2022, 39 (05) : 1240 - 1247
  • [26] Durability of molybdenum carbide catalysts in reductive upgrading of fast pyrolysis bio-oil
    Choi, Jae
    Unocic, Kinga
    Wu, Zili
    Wang, Huamin
    Zacher, Alan
    Habas, Susan
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2018, 255
  • [27] Study of hydrodeoxygenation of bio-oil from the fast pyrolysis of biomass
    Zhang, SP
    Yan, YJ
    Ren, JW
    Li, TC
    ENERGY SOURCES, 2003, 25 (01): : 57 - 65
  • [28] Study on Catalytic Pyrolysis of Manchurian Ash for Production of Bio-Oil
    Wang, Shurong
    Liu, Qian
    Wang, Kaige
    Guo, Xiujuan
    Luo, Zhongyang
    Cen, Kefa
    Fransson, Torsten
    INTERNATIONAL JOURNAL OF GREEN ENERGY, 2010, 7 (03) : 300 - 309
  • [29] Experimental study of biomass flash pyrolysis for bio-oil production
    Wang, Qi
    Wang, Shu-Rong
    Wang, Le
    Tan, Hong
    Luo, Zhong-Yang
    Cen, Ke-Fa
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2007, 28 (01): : 173 - 176
  • [30] Bio-oil production by fast pyrolysis of cellulose/polyethylene mixtures in the presence of metal chloride
    A. Solak
    P. Rutkowski
    Journal of Material Cycles and Waste Management, 2014, 16 : 491 - 499