CL surface deformation approach for a 5-axis tool path generation

被引：0
|
作者：
Su-Jin Kim
Dong-Yoon Lee
Hyun-Chul Kim
Sung-Gun Lee
Min-Yang Yang
机构：
[1] Korea Advanced Institute of Science and Technology,Department of Mechanical Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2006年 / 28卷
关键词：
CL surface; Deformation; 5-axis tool path; Triangular mesh ;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this paper, the 5-axis tool path that has been generated on the cutter contact (CC) surface is generated on the cutter location (CL) surface, and the CL surface deformation approach that inversely deforms the 3-axis tool path generated on the deformed CL surface to a 5-axis tool path is introduced. The CL point computation and interference check based on the CL surface is faster and more robust than that based on the CC surface. The proposed CL surface deformation approach can be used if the orientation of the cutter is predefined. By the CL surface deformation approach, the 5-axis tool path generation time can be reduced to that of a 3-axis, since the complexity of a CL surface deformation is linear and because the 3-axis tool path generation and gouge removal algorithms are used at the deformed CL surface .
引用
收藏
页码：509 / 517
页数：8
相关论文
共 50 条
  • [21] Development of tool-path generation module for 5-axis control machining of impellers
    Jung, Hyoun-chul
    Son, Hwang-jin
    Jung, Yoon-gyo
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2012, 19 (12) : 3424 - 3429
  • [22] Tool path generation using C-space for 5-axis control machining
    Morishige, K
    Takeuchi, Y
    Kase, K
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1999, 121 (01): : 144 - 149
  • [23] Development of tool-path generation module for 5-axis control machining of impellers
    Hyoun-chul Jung
    Hwang-jin Son
    Yoon-gyo Jung
    Journal of Central South University, 2012, 19 : 3424 - 3429
  • [24] Development of tool-path generation module for 5-axis control machining of impellers
    JUNG Hyoun-chul
    SON Hwang-jin
    JUNG Yoon-gyo
    JournalofCentralSouthUniversity, 2012, 19 (12) : 3424 - 3429
  • [25] Tool path generation of 5-axis CNC whirlwind milling model for freeform surfaces
    Yi, Xianzhong
    Qi, Haiying
    Liu, Qiang
    Yi, Xianbing
    2005 IEEE International Conference on Mechatronics and Automations, Vols 1-4, Conference Proceedings, 2005, : 537 - 540
  • [26] Automatic Tool-path Generation in 5-axis Finish Cut with Multiple Cutters
    Li, H. Y.
    Zhang, Y. F.
    2009 IEEE INTERNATIONAL CONFERENCE ON VIRTUAL ENVIRONMENTS, HUMAN-COMPUTER INTERFACES AND MEASUREMENT SYSTEMS, 2009, : 210 - 213
  • [27] Tool Orientation Optimization and Path Planning for 5-Axis Machining
    Chunming Yuan
    Zhenpeng Mi
    Xiaohong Jia
    Fengming Lin
    Liyong Shen
    Journal of Systems Science and Complexity, 2021, 34 : 83 - 106
  • [28] A CL surface deformation approach for constant scallop height tool path generation from triangular mesh
    Su-Jin Kim
    Min-Yang Yang
    The International Journal of Advanced Manufacturing Technology, 2006, 28 : 314 - 320
  • [29] A CL surface deformation approach for constant scallop height tool path generation from triangular mesh
    Kim, Su-Jin
    Yang, Min-Yang
    International Journal of Advanced Manufacturing Technology, 2006, 28 (3-4): : 314 - 320
  • [30] A CL surface deformation approach for constant scallop height tool path generation from triangular mesh
    Kim, SJ
    Yang, MY
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 28 (3-4): : 314 - 320
12345