Composite cathode Bi1.14Sr0.43O2.14-Ag for intermediate-temperature solid oxide fuel cells

被引:0
|
作者
Zhan Gao
Ping Zhang
Ruifeng Gao
Jianbing Huang
Zongqiang Mao
机构
[1] China University of Geosciences,Faculty of Material Science and Chemical Engineering
[2] Tsinghua University,Institute of Nuclear and New Energy Technology
关键词
solid oxide fuel cells (SOFCs); composite cathode; strontium stabilized bismuth oxide (SSB); samaria doped ceria (SDC);
D O I
暂无
中图分类号
学科分类号
摘要
Composites consisting of strontium stabilized bismuth oxide (Bi1.14Sr0.43O2.14, SSB) and silver were investigated as cathodes for intermediate-temperature solid oxide fuel cells with doped ceria electrolyte. There were no chemical reactions between the two components. The microstructure of the interfaces between composite cathodes and Ce0.8Sm0.2O1.9 (SDC) electrolytes was examined by scanning electron microscopy (SEM). Impedance spectroscopy measurements show that the performance of cathode fired at 700 °C is the best. When the content of Ag2O is 70 wt%, polarization resistance values for the SSB-Ag cathodes are as low as 0.2 Ωcm2 at 700 °C and 0.29 Ωcm2 at 650 °C. These results are much smaller than some of other reported composite cathodes on doped ceria electrolyte and indicate that SSB-Ag composite is a potential cathode material for intermediate temperature SOFCs.
引用
收藏
页码:350 / 353
页数:3
相关论文
共 50 条
  • [31] Performance characteristics of composite film electrolytes for intermediate-temperature solid oxide fuel cells
    A. Tsoga
    A. Gupta
    D. Stöver
    Ionics, 1999, 5 : 175 - 182
  • [32] Characterization of SmBaCoFeO5+δ Cathode Material for Intermediate-temperature Solid Oxide Fuel Cells
    Lu, S.
    Meng, X.
    Long, G.
    Wang, X.
    Ji, Y.
    SOLID OXIDE FUEL CELLS 11 (SOFC-XI), 2009, 25 (02): : 2507 - 2512
  • [33] Materials for Intermediate-Temperature Solid-Oxide Fuel Cells
    Kilner, John A.
    Burriel, Monica
    ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 44, 2014, 44 : 365 - 393
  • [34] Cathode infiltration with enhanced catalytic activity and durability for intermediate-temperature solid oxide fuel cells
    Niu, Yinghua
    Huo, Weirong
    Yu, Yuandong
    Li, Wenjun
    Chen, Yulin
    Lv, Weiqiang
    CHINESE CHEMICAL LETTERS, 2022, 33 (02) : 674 - 682
  • [35] Electrolyte materials for intermediate-temperature solid oxide fuel cells
    Huangang Shi
    Chao Su
    Ran Ran
    Jiafeng Cao
    Zongping Shao
    Progress in Natural Science:Materials International, 2020, 30 (06) : 764 - 774
  • [36] Co-doped Sr2FeNbO6 as cathode materials for intermediate-temperature solid oxide fuel cells
    Xia, Tian
    Lin, Nan
    Zhao, Hui
    Huo, Lihua
    Wang, Jingping
    Grenier, Jean-Claude
    JOURNAL OF POWER SOURCES, 2009, 192 (02) : 291 - 296
  • [37] Layered perovskite PrBa0.5Sr0.5CoCuO5+δ as a cathode for intermediate-temperature solid oxide fuel cells
    Wang, Biao
    Long, Guohui
    Ji, Yuan
    Pang, Mingjun
    Meng, Xiangwei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 606 : 92 - 96
  • [38] Electrochemical performance of Ba2Co9O14 + SDC composite cathode for intermediate-temperature solid oxide fuel cells
    Li, Yan
    Xu, M. W.
    Goodenough, John B.
    JOURNAL OF POWER SOURCES, 2012, 209 : 40 - 43
  • [39] Effect of Bi2O3 on the electrochemical performance of LaBaCo2O5+δ cathode for intermediate-temperature solid oxide fuel cells
    Li, Ruifeng
    Wang, Dalei
    Ge, Lin
    He, Shoucheng
    Chen, Han
    Guo, Lucun
    CERAMICS INTERNATIONAL, 2014, 40 (02) : 2599 - 2603
  • [40] Sr0.7Ho0.3CoO3-δ as a potential cathode material for intermediate-temperature solid oxide fuel cells
    Liu, Tao
    Li, Yan
    Goodenough, John B.
    JOURNAL OF POWER SOURCES, 2012, 199 : 161 - 164