Structure and Mechanical Properties of Bimetal Nb/Cu Rods for Production of Nb3Sn Superconductors

被引：0

作者：

Abdyukhanov I.M. ^{[1
]}

Tsapleva A.S. ^{[1
]}

Alekseev M.V. ^{[1
]}

Figurovskii D.K. ^{[2
]}

Dergunova E.A. ^{[1
,3
]}

Morosanov A.V. ^{[2
]}

Pantsyrnyi V.I. ^{[1
]}

机构：

[1] Bochvar High-Technology Scientific Research Institute for Inorganic Materials (VNIINM), Moscow

[2] MIREA—Russian Technological University, Moscow

[3] National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow

来源：

Inorganic Materials: Applied Research | 2020年 / 11卷 / 04期

关键词：

deformation; mechanical properties; Nb[!sub]3[!/sub]Sn; niobium; recrystallization; structure; superconductor;

D O I：

10.1134/S2075113320040024

中图分类号：

学科分类号：

摘要：

Abstract: To construct magnetic systems in modern high-energy physics projects, such as creation of the Future Circular Collider (FCC) and modernization of the Large Hadron Collider (HL-LHC), Nb3Sn superconductors with a high level of electrophysical properties, above all being a high current carrying capacity, are requisite. Such multifilament Nb3Sn superconductors are obtained by the technique of internal feeding of tin (IFT), consisting in deformation of a composite including high-purity niobium, copper, and tin to make a wire smaller less than 1 mm in diameter. The presence of such components as tin-based alloys or pure tin with Tm = 232°C in the composite wire composition precludes the possibility of Nb recrystallization annealing, which imposes strict requirements on the Nb mechanical properties, which determine the Nb capability for plastic deformation. In the study, the influence of the design and conditions of creating bimetal Nb/Cu rods on the grain structure of niobium and the state of the boundary between it and a copper sheath is discussed. The mechanical properties of rods at different steps of their fabrication are investigated. The results will be applied in development of the technological conditions of manufacture of Nb3Sn superconductors by the IFT technique. © 2020, Pleiades Publishing, Ltd.

引用

页码：751 / 756

页数：5

共 50 条

[31] THE INFLUENCE OF BAND-STRUCTURE ON THE ELECTROMAGNETIC PROPERTIES OF SUPERCONDUCTING NB AND NB3SN
BLASCHKE, R
ASHKENAZI, J
PICTET, O
KOELLING, DD
VANKESSEL, AT
MULLER, FM
JOURNAL OF PHYSICS F-METAL PHYSICS, 1984, 14 (01): : 175 - 189
[32] Effect of Multifilamentary Nb/Cu-Sn Wire Diameter on the Nb3Sn Diffusion Layers Structure
Popova, E. N.
Romanov, E. P.
Deryagina, I. L.
Sudareva, S. V.
Dergunova, E. A.
Vorobyova, A. E.
Balaev, S. M.
DIFFUSION IN SOLIDS AND LIQUIDS VI, PTS 1 AND 2, 2011, 312-315 : 289 - +
[33] Interdiffusion and Growth of the Superconductor Nb3Sn in Nb/Cu(Sn) Diffusion Couples
Kumar, A. K.
Paul, A.
JOURNAL OF ELECTRONIC MATERIALS, 2009, 38 (05) : 700 - 705
[34] Structure and properties of Nb3Sn coatings produced by unsteady-current electrocodeposition of Nb and Sn
V. N. Kolosov
A. A. Shevyrev
Inorganic Materials, 2009, 45 : 1003 - 1008
[35] Structure and Properties of Nb3Sn Coatings Produced by Unsteady-Current Electrocodeposition of Nb and Sn
Kolosov, V. N.
Shevyrev, A. A.
INORGANIC MATERIALS, 2009, 45 (09) : 1003 - 1008
[36] Study on the Growth of Nb3Sn Superconductor in Cu(Sn)/Nb Diffusion Couple
Kumar, A. K.
Laurila, T.
Vuorinen, V.
Paul, A.
DIFFUSION IN SOLIDS AND LIQUIDS V, PTS 1 AND 2, 2010, 297-301 : 467 - +
[37] Interdiffusion and Growth of the Superconductor Nb3Sn in Nb/Cu(Sn) Diffusion Couples
A.K. Kumar
A. Paul
Journal of Electronic Materials, 2009, 38 : 700 - 705
[38] DIFFUSION OF NB AND SN IN POLYCRYSTALLINE NB3SN
KNOX, RD
WRIGHT, RN
JOURNAL OF METALS, 1984, 36 (07): : 36 - 36
[39] PRODUCTION OF NB3SN BY THE INSITU PROCESS
SPENCER, CR
ADAM, E
GREGORY, E
MARANCIK, W
ROSEN, CZ
IEEE TRANSACTIONS ON MAGNETICS, 1981, 17 (01) : 257 - 260
[40] Cu diffusion in Nb3Sn internal tin superconductors during heat treatment
Pong, Ian
Oberli, Luc-Rene
Bottura, Luca
SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2013, 26 (10):

← 1 2 3 4 5 →