Research on progressive failure process of Baishuihe landslide based on Monte Carlo model

被引:0
|
作者
Fasheng Miao
Yiping Wu
Yuanhua Xie
Feng Yu
Lijuan Peng
机构
[1] China University of Geosciences,Faculty of Engineering
[2] Ministry of Education,Three Gorges Research Center for Geo
关键词
Landslide; Monte Carlo; Numerical simulation; Progressive failure; Reservoir level; Rainfall;
D O I
暂无
中图分类号
学科分类号
摘要
To the progressive landslide, development of the internal deformation and failure situation can’t be accurately reflected by the overall stability of coefficients and failure probability. But this problem can be solved by utilizing the principle of progressive failure by slices. Taking the warning area of Baishuihe landslide as an example, 5 days accumulated rainfall in different reappearing period is computed by Gumbel model. The failure probability of each slice is calculated by progressive failure principle, which is based on Monte Carlo model. The following results can be revealed through calculation: Overall stability and failure probability can’t reflect real situation of Baishuihe landslide warning area. Through building the calculation of progressive failure model of each slice, the stability of each part in the Baishuihe landslide warning area is quite different. Unstable region mainly lies in vicinity of the middle and posterior warning area. The front of the warning area remains stable. Deformation characteristics of the warning area are consistent with the investigation report. The scope of unstable area increased gradually with rainfall and the decline of reservoir water. Under 5 day’s accumulated rainfall of 50 years, the poor stable and unstable region reached 75 %, there is a large possibility of local deformation slip. Under the joint action of rainfall and reservoir water level, the warning area of Baishuihe landslide shows a progressive failure mode from top to bottom.
引用
收藏
页码:1683 / 1696
页数:13
相关论文
共 50 条
  • [21] The failure instability probability of landslide under multi-form distributions of parameters based on Monte-Carlo method
    Wu, Chuansheng (wuchuansheng2014@163.com), 1600, E-Journal of Geotechnical Engineering (19):
  • [22] A Monte Carlo-Based Probabilistic Barrier Failure Model for Arbitrary Fire Environment
    Xiao Li
    Xia Zhang
    George Hadjisophocleous
    Fire Technology, 2019, 55 : 1319 - 1347
  • [23] A Monte Carlo-Based Probabilistic Barrier Failure Model for Arbitrary Fire Environment
    Li, Xiao
    Zhang, Xia
    Hadjisophocleous, George
    FIRE TECHNOLOGY, 2019, 55 (04) : 1319 - 1347
  • [24] A Monte Carlo approach for evaluation of availability and failure intensity under g-renewal process model
    Yevkin, O.
    ADVANCES IN SAFETY, RELIABILITY AND RISK MANAGEMENT, 2012, : 1015 - 1021
  • [25] Point process-based Monte Carlo estimation
    Walter, Clement
    STATISTICS AND COMPUTING, 2017, 27 (01) : 219 - 236
  • [26] Point process-based Monte Carlo estimation
    Clément Walter
    Statistics and Computing, 2017, 27 : 219 - 236
  • [27] Software testing technology research based on Monte Carlo method and classical probability model
    Zhang Zhonglin
    Hu Yuehua
    Xu Xiaomei
    Ma Haiyun
    ICCSE'2006: PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON COMPUTER SCIENCE & EDUCATION: ADVANCED COMPUTER TECHNOLOGY, NEW EDUCATION, 2006, : 872 - 874
  • [28] Quantitative research on component failure by using Monte-Carlo method
    He Zongbo
    Jian Lujing
    Wang Yuying
    Li Yunze
    FIFTH INTERNATIONAL SYMPOSIUM ON LASER INTERACTION WITH MATTER, 2019, 11046
  • [29] Research on Reliability Evaluation Based on Monte Carlo Method
    Li Xiang-ning
    Wu Fu-qiang
    Sun Xiao-feng
    MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5, 2012, 130-134 : 3859 - 3861
  • [30] Stochastic process model for dynamic reliability and Monte Carlo simulation
    Li, CL
    Liu, Y
    Xie, LY
    PROCEEDINGS OF THE 11TH INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, VOLS 1 AND 2: INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT IN THE GLOBAL ECONOMY, 2005, : 918 - 921