Synthesis and characterization of porous Fe–25 wt.% Al alloy with controllable pore structure

被引：0
|
作者：
P. Z. Shen
M. Song
Y. H. He
H. Y. Gao
J. Zou
N. P. Xu
B. Y. Huang
C. T. Liu
机构：
[1] Central South University,
[2] The University of Queensland,undefined
[3] Nanjing University of Technology,undefined
[4] The Hong Kong Polytechnic University,undefined
来源：
Powder Metallurgy and Metal Ceramics | 2010年 / 49卷
关键词：
intermetallics; powder metallurgy; iron aluminides; porous material;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Porous Fe–25 wt.% Al alloy is synthesized by reactive synthesis with Fe and Al powders as the raw materials. Various processing parameters such as the final sintering temperature, pressure during cold pressing, and powder size are investigated to control the pore structure of the alloy. It has been shown that the optimal final sintering temperature is around 950–1050°C. When the pressure is higher than 110 MPa, the variation of the pore structure is mainly caused by the change of the pore nature in the as-pressed compact. In addition, the pore structure of porous Fe–25 wt.% Al alloys depends on the size of the raw powders and the weight fraction of different-sized raw powders.
引用
收藏
页码：183 / 192
页数：9
相关论文
共 50 条
  • [31] Soft magnetic properties of Fe-(1 wt.%) Al alloy processed by powder metallurgy
    Putatunda, SK
    Nielsen, T
    Talagala, P
    Naik, R
    Wenger, L
    MATERIALS AND MANUFACTURING PROCESSES, 2000, 15 (03) : 405 - 418
  • [32] Ultrafine-grained Al-5 wt.% Fe alloy processed by ECAP with backpressure
    Stolyarov, VV
    Lapovok, R
    Brodova, IG
    Thomson, PF
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 357 (1-2): : 159 - 167
  • [33] Modification effect of Ni-38 wt.%Si on Al-12 wt.%Si alloy
    Wu Yuying
    Liu Xiangfa
    Jiang Binggang
    Huang Chuanzhen
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 477 (1-2) : 118 - 122
  • [34] Investigation of trace elements in an Al-4.8 wt.% Mg-0.3 wt.% Mn alloy
    Simensen, CJ
    Södervall, U
    SURFACE AND INTERFACE ANALYSIS, 2000, 30 (01) : 309 - 314
  • [35] Evolution of the texture of spray-formed Fe-6.5 wt.% Si-1.0 wt.% Al alloy during warm-rolling
    Machado, R.
    Kasama, A. H.
    Jorge, A. M., Jr.
    Kiminami, C. S.
    Fo, W. J. Botta
    Bolfarini, C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 : 854 - 857
  • [36] Controllable arrangement of integrated obstacles in silicon microchannels etched in 25 wt.% TMAH
    Smiljanic, Milce M.
    Radenovic, Branislav
    Lazic, Zarko
    Radmilovic-Radenovic, Marija
    Rafajilovic, Milena Rasljic
    Cvetanovic-Zobenica, Katarina
    Milinkovic, Evgenija
    Filipovic, Ana
    HEMIJSKA INDUSTRIJA, 2021, 75 (01) : 15 - 24
  • [37] Precipitation behavior of an Fe-1.03 wt.% Cu alloy
    Mao, W
    Ren, H
    Yu, Y
    ZEITSCHRIFT FUR METALLKUNDE, 2004, 95 (01): : 57 - 59
  • [38] Simultaneous Increase of Electrical Conductivity and Hardness of Al-1.5 wt.% Mn Alloy by Addition of 1.5 wt.% Cu and 0.5 wt.% Zr
    Belov, Nikolay
    Korotkova, Natalya
    Akopyan, Torgom
    Tsydenov, Kirill
    METALS, 2019, 9 (12)
  • [39] Synthesis and Characterization of the Catalysts 5 wt.% and 10 wt.% Co/SBA-15
    Lima, L. A.
    Sousa, B. V.
    Rodrigues, M. G. F.
    ADVANCED POWDER TECHNOLOGY VII, 2010, 660-661 : 561 - 566
  • [40] Porous Ceramic Made from Powders Prepared by Chemical Dispersion of Alloy Al–Mg (20 wt.%)
    A. A. Vasin
    V. P. Tarasovskii
    V. V. Rybal’chenko
    A. Yu. Omarov
    Refractories and Industrial Ceramics, 2015, 55 : 532 - 534
12345