Influence of increased fuel-injection pressure on the stress state of gears in a diesel drive

被引：0
|
作者：
Zhukov A.A. [1 ]
Navoev A.P. [1 ]
Zhukov V.A.. [1 ]
Korytov S.V. [1 ]
机构：
[1] Solov'ev Rybinsk State Aviation-Technology Academy, Rybinsk
来源：
Russian Engineering Research | 2009年 / 29卷 / 02期
关键词：
RUSSIAN Engineer Research; Fatigue Limit; Gear Tooth; Drag Torque; Fuel Pump;
D O I：
10.3103/S1068798X0902004X
中图分类号：
学科分类号：
摘要：
It has been analyzed the stressed state of diesel drive gear of YaM3 model. It is shown that if the fuel injection pressure is increased, the contact and bending stresses in the gears increase. It has been obtained the relationships between the gear stresses and the fuel pump torque, which is determined by injection pressure. © Allerton Press, Inc. 2009.
引用
收藏
页码：122 / 125
页数：3
相关论文
共 50 条
  • [31] The influence of various additives on the combustion of diesel fuel in fuel injection engines
    Aubert, M
    Clerget, P
    Duchene, R
    COMPTES RENDUS HEBDOMADAIRES DES SEANCES DE L ACADEMIE DES SCIENCES, 1935, 201 : 879 - 881
  • [32] Influence of Back Pressure at the Injection Nozzle on the Injection Characteristic of Port Controlled Plunger Type Diesel Fuel Injection Pumps.
    Herzog, Peter
    MTZ Motortechnische Zeitschrift, 1980, 41 (12) : 535 - 538
  • [33] Influence of dynamic change of needle and hydraulic pressure in diesel injection nozzle on fuel spray characteristic
    Xie, Fang-Xi
    Yao, Zhuo-Tong
    Hu, Xue-Song
    Cao, Xiao-Feng
    Jia, Gui-Qi
    Hong, Wei
    Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2013, 43 (04): : 897 - 902
  • [34] The impact of fuel injection pressure on the exhaust emissions of a direct injection diesel engine fueled with biodiesel-diesel fuel blends
    Gumus, Metin
    Sayin, Cenk
    Canakci, Mustafa
    FUEL, 2012, 95 (01) : 486 - 494
  • [35] SUPERSONIC DIESEL FUEL-INJECTION THROUGH A SINGLE-HOLE NOZZLE IN A COMPACT GAS GUN .2.
    SHI, HH
    TAKAYAMA, K
    ONODERA, O
    JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, 1994, 37 (03) : 509 - 516
  • [36] Cycle-to-Cycle Multipulse Fuel-Injection Control for Advanced Diesel Combustion in Changing and Disturbed Operating Points
    Luo, Xi
    Grossbichler, Martin
    Waschl, Harald
    Donkers, M. C. F.
    de Jager, Bram
    Willems, Frank
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2021, 143 (01):
  • [37] THE EFFECTS OF FUEL INJECTION PRESSURE AND FUEL TYPE ON THE COMBUSTION CHARACTERISTICS OF A DIESEL ENGINE
    Cowart, Jim
    Prak, Dianne Luning
    Hamilton, Len
    PROCEEDINGS OF THE ASME INTERNAL COMBUSTION ENGINE DIVISION, FALL TECHNICAL CONFERENCE, 2014, VOL 1, 2014,
  • [38] The Effects of Fuel Injection Pressure and Fuel Type on the Combustion Characteristics of a Diesel Engine
    Cowart, Jim
    Prak, Dianne Luning
    Hamilton, Len
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2015, 137 (10):
  • [39] Influence of fuel injection pressure and injection timing on nanoparticle emission in light-duty gasoline/diesel RCCI engine
    Saxena, Mohit Raj
    Maurya, Rakesh Kumar
    PARTICULATE SCIENCE AND TECHNOLOGY, 2021, 39 (05) : 641 - 650
  • [40] Spray structure in diesel fuel spray with high injection pressure
    Dan, T.
    Takagishi, S.
    Ohishi, N.
    Senda, J.
    Fujimoto, H.
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1996, 62 (597): : 2079 - 2085
12345