Intermetallic phase formation in directionally solidified Al−Si−Fe alloy

被引：0
|
作者：
Y. S. Han
J. O. Choi
C. O. Choi
D. G. McCartney
机构：
[1] Dong-A University,Department of Metallurgical Engineering
[2] University Park,School of Mechanical, Materials, Manufacturing Engineering and Management Faculty of Engineering University of Nottingham
来源：
Metals and Materials International | 2004年 / 10卷
关键词：
Al−7Si alloys; Bridgman solidification; directionally solidified Al−Si alloys; β-Al; SiFe phase; σ-Al; FeSi;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The present study has been undertaken to better understand the solidification behavior of Al−Si−Fe alloys containing 7wt.% Si and 0.9wt.% Fe, with particular regard to the formation of phase during controlled solidification and influence of growth rates on intermetallic phase selection. The alloys studied were Al-7Si-0.9Fe alloys, which were produced by a modified Bridgman solidification arrangement. These alloys were solidified unidirectionally with different growth rates (1–30mm/min). The solidified microstructure of these alloys consists of the growth of primary aluminum and multiple second phase reactions.
引用
收藏
页码：27 / 32
页数：5
相关论文
共 50 条
  • [31] The effect of oxygen content and cooling rate on phase transformations in directionally solidified intermetallic Ti-46Al-8Nb alloy
    Lapin, J.
    Gabalcova, Z.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2008, 46 (04): : 185 - 195
  • [32] Effect of lamellar structure on microhardness and yield stress of directionally solidified intermetallic Ti-46Al-2W-0.5Si alloy
    Lapin, J
    JOURNAL OF MATERIALS SCIENCE LETTERS, 2003, 22 (10) : 747 - 749
  • [33] Formation of the icosahedral quasicrystalline phase in a rapidly solidified Al52Cu25.5Fe12.5Si10 alloy
    Wang, Y
    Zhang, ZH
    Geng, HR
    Yang, ZX
    MATERIALS CHARACTERIZATION, 2006, 56 (03) : 200 - 207
  • [34] Formation of the microstructure in a rapid directionally solidified immiscible alloy
    Zhao, JZ
    Ratke, L
    SOLIDIFICATION AND GRAVITY IV, 2006, 508 : 31 - 36
  • [35] Microstructural, mechanical and electrical characterization of directionally solidified Al-Si-Mg eutectic alloy
    Kaygisiz, Yusuf
    Marasli, Necmettin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 618 : 197 - 203
  • [36] Microstructural, mechanical and electrical characterization of directionally solidified Al-Si-Mg eutectic alloy
    Maraşli, Necmettin, 1600, Elsevier Ltd (618):
  • [37] The effect of microstructure on mechanical properties of directionally solidified intermetallic Ti-46Al-8Nb alloy
    Lapin, J.
    Gabalcova, Z.
    Bajana, O.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2009, 47 (03): : 159 - 167
  • [38] Microstructure and mechanical properties of a directionally solidified and aged intermetallic Ni-Al-Cr-Ti alloy with β-γ′-γ-α structure
    Lapin, J
    Pelachová, T
    Bajana, O
    INTERMETALLICS, 2000, 8 (12) : 1417 - 1427
  • [39] Cellular Microstructure and Mechanical Properties of a Directionally Solidified Al-1.0wt%Fe Alloy
    Goulart, P. R.
    Spinelli, J. E.
    Bertelli, F.
    Osorio, W. R. R.
    Cheung, N.
    Garcia, A.
    ADVANCED MATERIALS FORUM V, PT 1 AND 2, 2010, 636-637 : 564 - 570
  • [40] Correction to: Physical Properties of Directionally Solidified Al-1.9Mn-5Fe Alloy
    İ. Yılmazer
    E. Çadırlı
    H. Kaya
    U. Büyük
    Journal of Materials Engineering and Performance, 2021, 30 : 1611 - 1611
12345