Thermal tuning and modulation of a DFB fibre laser with a thin-film heater

Results are given for thermal tuning and modulation of a 1556-nm distributed feedback fibre laser by resistive heating of a thin silver film chemically deposited on the fibre. Without reaching the limits of performance, linear tuning is demonstrated at a rate of 1.72 pm/mW up to about 200 pm, and a peak-to-peak modulation of 100 MHz up to modulation frequencies of 60 Hz. The heat flow is analyzed, and the coated fibre is characterized in terms of the static and dynamic wavelength response to the applied electric power. The performance of the scheme is tested by recording part of the ν1+ν3 combination band spectrum of 13C2H2 with thermal modulation and scanning of the fibre laser.