Determination of steroidal oestrogens in tap water samples using solid-phase extraction on a molecularly imprinted polymer sorbent and quantification with gas chromatography-mass spectrometry (GC-MS)

An analytical method was established and validated for the analysis of steroidal oestrogens in tap water samples. Gas chromatography coupled to high-resolution mass spectrometry (GC-HRMS) and gas chromatography coupled to tandem mass spectrometry (GC-MS/MS) were used for the identification/quantification of selected compounds and the analytical performance of these techniques was evaluated. Liquid-liquid extraction (LLE) and solid-phase extraction (SPE) with a molecularly imprinted polymer (MIP) stationary phase that was highly selective for oestrogens were used for the extraction of 100-mL aliquots of water samples. The recoveries of analytes with the described methods ranged from 92 to 114 %, while the repeatability in terms of relative standard deviations (RSDs) was in the range from 2.1 to 15.2 % (n = 5). It was concluded that SPE with MIP that was highly selective for oestrogens in combination with GC-HRMS detection is more preferable for the analysis of oestrogens in tap water samples. The typical oestrogen, 17β-estradiol (17β-E2), was detected above the method limit of quantification (m-LOQ) in 5 of 14 analysed tap water samples at concentrations from 0.09 to 0.15 ng L−1. Despite that 17α-ethynylestradiol (17α-EE2) was not quantified in this study above m-LOQ, the presence of this chemical was qualitatively confirmed in some of the analysed samples.