Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys

被引：0
|
作者：
J. Slota
M. Šiser
M. Dvorák
机构：
[1] Technical University of Košice,
[2] Faculty of Mechanical Engineering,undefined
[3] Institute of Material and Technological Engineering,undefined
[4] Brno University of Technology,undefined
[5] Faculty of Mechanical Engineering,undefined
来源：
Strength of Materials | 2017年 / 49卷
关键词：
finite element method (FEM); ANSYS; clinching; three sheets; steel; mechanical joining;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Presented work deals with springback behavior of two different aluminum alloys, one falling into 5th series (AW-5754 H22) with a thickness of 0.8 mm and other from 6th series (AW-6082 T6) with 1.0 mm thickness. These materials are used for their various applications and hardening process. The springback behavior was investigated by U-bending test. Bending tool was graduated jig with rollers and experiment was performed on R11 and R17 radii. The first series of specimens were oriented in a parallel direction and the other in a direction perpendicular to the rolling direction. Experimental results were measured with MATLAB measuring method and compared with finite element calculation carried out in PAM-STAMP. Influence of different yield functions was also examined.
引用
收藏
页码：565 / 574
页数：9
相关论文
共 50 条
  • [31] EXPERIMENTAL AND NUMERICAL ANALYSIS OF MECHANICAL BEHAVIOR IN FRICTION STIR WELDED DIFFERENT TITANIUM ALLOYS
    Kulkarni, Neha
    Ramulu, M.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2B, 2014,
  • [32] Numerical and experimental evaluation of springback in a front side member
    Andersson, A
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 169 (03) : 352 - 356
  • [33] Experimental and numerical analysis on the post-fire flexural behavior of aluminum alloy gusset joints
    Chen, Shaozhen
    Guo, Xiaonong
    Luo, Jinhui
    Xu, Zeyu
    Chen, Chen
    ADVANCES IN STRUCTURAL ENGINEERING, 2024, 27 (09) : 1564 - 1579
  • [34] Experimental and numerical analysis of the compression behavior of aluminum syntactic foams reinforced with alumina hollow particles
    Sonti, Kartheek S. M.
    Penumakala, Pavan Kumar
    Narala, Suresh Kumar Reddy
    Vincent, S.
    ENGINEERING STRUCTURES, 2024, 300
  • [35] The behavior and forming performance of vapor hydroforming process of thin aluminum sheets: Numerical and experimental analysis
    Jebri, Leila
    Lazghab, Tarek
    Toumi, Mohamed
    Soula, Mohamed
    ADVANCES IN MECHANICAL ENGINEERING, 2022, 14 (04)
  • [36] Effects of Holding Force on the Springback Behavior of Annealed Aluminum Plates
    Erdin, Muhammed Emin
    Atmaca, Alper
    INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016, 2016, 149 : 56 - 61
  • [37] Experimental study and numerical simulation on the mechanical behavior of tungsten alloys
    Song, Wei-Dong
    Liu, Hai-Yan
    Ning, Jian-Guo
    Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology, 2007, 27 (09): : 756 - 760
  • [38] Numerical Analysis of Four-Hole Extrusion of Aluminum Alloys
    Libura, W.
    Rekas, A.
    Lesniak, D.
    ADVANCES ON HOT EXTRUSION AND SIMULATION OF LIGHT ALLOYS, 2010, 424 : 173 - 179
  • [39] Numerical Analysis of Aluminum Alloys Extrusion Through Porthole Dies
    Zasadzinski, J.
    Rekas, A.
    Libura, W.
    Richert, J.
    Lesniak, D.
    ADVANCES ON HOT EXTRUSION AND SIMULATION OF LIGHT ALLOYS, 2010, 424 : 105 - 111
  • [40] Numerical and Experimental Analysis of Profile Complexity in Aluminum Extrusion
    Chekotu, Josiah Cherian
    Qamar, Sayyad Zahid
    Qamar, Sayyad Basim
    PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON FRACTURE, FATIGUE AND WEAR, FFW 2021, 2022, : 149 - 157
12345