On the Issue of Determining the Number of Cutting Abrasive Grains on the Working Surface of a Grinding Wheel

被引：0
|
作者：
Fedotov V.V. [1 ]
Osipov A.P. [1 ]
Kiselev E.S. [2 ]
机构：
[1] Syzran Branch of Samara State Technical University, Syzran
[2] Ulyanovsk State Technical University, Ulyanovsk
来源：
Russian Engineering Research | 2023年 / 43卷 / 02期
关键词：
binder; cutting abrasive grains; experimental sample; experimental technique; grinding wheel; penetration depth;
D O I：
10.3103/S1068798X23030097
中图分类号：
学科分类号：
摘要：
Abstract: The work discusses the method of experimental determination of the number of cutting abrasive grains on the working surface of a grinding wheel. We experimentally evaluate the value of the fraction of cutting grains from the total number of abrasive grains on the working surface of the grinding wheel, establish the dependence of this parameter on the type of abrasive material, its grain size, manufacturer fabrication technology, and compare the results with the results of other researchers. Experimental studies show that the number of cutting grains is 10–15% more than most researchers believe. Further developments will be aimed at compiling regulatory databases for use in engineering calculations. © 2023, Allerton Press, Inc.
引用
收藏
页码：182 / 185
页数：3
相关论文
共 50 条
  • [31] Failure of diamond grains at the working surface of grinding wheels
    Popov A.V.
    Russian Engineering Research, 2009, 29 (08) : 838 - 840
  • [32] Grinding wheel working surface. Trends of research
    Koziarski, Andrzej
    Prace Naukowe Instytutu Technologii Maszyn i Automatyzacji Politechniki Wroclawskiej, 1995, 59 (24):
  • [33] Surface Grinding of Ti-6Al-4V Alloy with SiC Abrasive Wheel at Various Cutting Conditions
    de Mello, Antonio Vitor
    de Silva, Rosemar Batista
    Machado, Alisson Rocha
    Gelamo, Rogerio Valentim
    Diniz, Anselmo Eduardo
    Moreira de Oliveira, Rodolfo Fischer
    45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45), 2017, 10 : 590 - 600
  • [34] Modeling and analysis of dynamic cutting points density of the grinding wheel with an abrasive phyllotactic pattern
    Haiyue Yu
    Jun Wang
    Yushan Lu
    The International Journal of Advanced Manufacturing Technology, 2016, 86 : 1933 - 1943
  • [35] Investigation of the Grinding Process Considering the Increase of the Active Surface of Abrasive Grains
    Kurin, Maksym
    Nyshnyk, Serhii
    Dolmatov, Anatolii
    ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING III: MANUFACTURING AND MATERIALS ENGINEERING, VOL 1, 2020, : 401 - 410
  • [36] Modeling and analysis of dynamic cutting points density of the grinding wheel with an abrasive phyllotactic pattern
    Yu, Haiyue
    Wang, Jun
    Lu, Yushan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 86 (5-8): : 1933 - 1943
  • [37] Study on the surface quality of finished by abrasive jet with grinding wheel as restraint
    Hou, Y. L.
    Li, C. H.
    Lu, B. H.
    2009 INTERNATIONAL CONFERENCE ON MEASURING TECHNOLOGY AND MECHATRONICS AUTOMATION, VOL III, 2009, : 322 - +
  • [38] An evaluation on surface topography finished by abrasive jet with grinding wheel as restraint
    Qingdao Technological University, 266033, China
    不详
    Key Eng Mat, 2007, (527-532): : 527 - 532
  • [39] INFLUENCE OF THE GRINDING WHEEL CUTTING SURFACE PROFILING ON GRINDING FORCES AND GROUND SURFACE-ROUGHNESS
    CEBALO, R
    STROJARSTVO, 1987, 29 (05): : 237 - 246
  • [40] Determination of the grinding force on optical glass based on a diamond wheel with an ordered arrangement of abrasive grains
    Yang, Zhibo
    He, Dongyu
    WangSun
    Zhang, Yuqi
    Zhang, Shiyu
    Shi, Hongbin
    ShianLiu
    Zhang, Yanru
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 115 (04): : 1237 - 1248
12345