A New Method to Design Cam Used in Automobile Heating, Ventilating and Cooling System

被引：0
|
作者：
Singh B. [1 ]
Singh D. [1 ]
Saini J.S. [1 ]
机构：
[1] Mechanical Engineering Department, Thapar University, Patiala
来源：
Journal of The Institution of Engineers (India): Series C | 2012年 / 93卷 / 04期
关键词：
CAE tools; Cam design; HVAC; Kinematics;
D O I：
10.1007/s40032-012-0040-2
中图分类号：
学科分类号：
摘要：
With the automotive air-conditioning industry aiming at better levels of quality, cost effectiveness and short time to market, the need for simulation is at an all time high. In the present study, the airflow control mechanism of an automotive heating, ventilating and cooling module for opening various doors/dampers were kinematically analyzed. A new method for cam design was developed which is faster and simpler than the existing oscillating link method. The existing design was modified for the same output using the new cam design method. It is shown that the torque required in the modified design is lesser than that in the existing design, thus lowering the effort required to rotate the cam from the control panel. © 2012, The Institution of Engineers (India).
引用
收藏
页码：275 / 286
页数：11
相关论文
共 50 条
  • [41] Design, monitoring and dynamic model development of a solar heating and cooling system
    Delac, Boris
    Paykovic, Branimir
    Lenic, Kristian
    APPLIED THERMAL ENGINEERING, 2018, 142 : 489 - 501
  • [42] Design of Cooling System of Over-molding Mold for Socket Component of Automobile Wiper
    Lee, Dong Gi
    Park, Min Woo
    Ahn, Dong Gyu
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2011, 35 (12) : 1635 - 1640
  • [43] A new design of configurable solar awning for managing cooling and heating loads
    Juanico, Luis E.
    ENERGY AND BUILDINGS, 2009, 41 (12) : 1381 - 1385
  • [44] Station and Network Coordinated Design Method of Regional Combined Cooling Heating and Power System Considering Load Characteristic
    Yao Z.
    Wang Z.
    Diangong Jishu Xuebao/Transactions of China Electrotechnical Society, 2021, 36 (22): : 4760 - 4772
  • [45] Design of Combined Cam Used in the New Jacquard Device Based on PROE and AutoCAD
    Liu, Fujun
    Yuan, Yanhong
    ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION III, PTS 1 AND 2, 2012, 201-202 : 56 - 60
  • [46] System Optimization Design of Combined Cooling, Heating, and Power System Integrated with Renewable Energies
    Wang R.
    Wang H.
    Sun B.
    Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban)/Journal of Tianjin University Science and Technology, 2021, 54 (12): : 1317 - 1326
  • [47] NEW METHOD FOR COMPENSATION OF THERMAL DEFORMATION AT ANISOTHERMAL PROGRAMMED HEATING (COOLING)
    KOTOV, PI
    VASHUNIN, AI
    ZINOVEV, VI
    ZAVODSKAYA LABORATORIYA, 1975, 41 (04): : 475 - 479
  • [48] A New Method of Active Thermal Testing: Combination of Heating and Forced Cooling
    A. O. Chulkov
    V. P. Vavilov
    B. I. Shagdirov
    D. Yu. Kladov
    V. I. Stasevskii
    Russian Journal of Nondestructive Testing, 2023, 59 : 592 - 600
  • [49] A New Method of Active Thermal Testing: Combination of Heating and Forced Cooling
    Chulkov, A. O.
    Vavilov, V. P.
    Shagdirov, B. I.
    Kladov, D. Yu.
    Stasevskii, V. I.
    RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING, 2023, 59 (05) : 592 - 600
  • [50] A New Design Method for the Rotor Profile Curve of the Cam Pump
    Liu, Guanyi
    Liu, Pingyi
    Wei, Wenjun
    Zhang, Shaoying
    Li, Haitao
    ADVANCED COMPOSITE MATERIALS, PTS 1-3, 2012, 482-484 : 1196 - 1200
12345