Application of the Finite Element Method to the Conservation of Old Foundations

被引:1
|
作者
Cividini A. [1 ]
Gioda G. [1 ]
机构
[1] Department of Architecture, Built Environment and Construction Engineering (ABC), Politecnico di Milano, Piazza Leonardo da Vinci, 32, Milan
关键词
Case history; Faulting; Finite element; Strain softening; Underpinning;
D O I
10.1007/s40098-016-0198-2
中图分类号
学科分类号
摘要
The elastic–plastic finite element analyses of two case histories are illustrated. They concern, respectively, the underpinning of the pier of an old bridge and the effects of the faulting process that could take place during a seismic event below an existing building. In both cases, the data are described first which were obtained from the in situ investigations carried out at the sites. Then the calculations are discussed showing that they lead to quite different conclusions in the two cases. For the first problem, in fact, the available geotechnical data were sufficient to calibrate the numerical model and led to a proper evaluation of the pier conditions. On the contrary, the soil data for the second problem were not sufficient to calibrate the strain softening material model necessary to analyse the faulting process. As a consequence, some uncertainties remain on the effects of the possible development of a fault in the soil underneath the foundation. To overcome them, the back analysis of in situ load tests is suggested and commented upon. © 2016, Indian Geotechnical Society.
引用
收藏
页码:195 / 207
页数:12
相关论文
共 50 条
  • [41] Application of the stochastic finite element method in welding simulation
    Zheng Li
    Benjamin Launert
    Hartmut Pasternak
    Welding in the World, 2018, 62 : 905 - 912
  • [42] Application of Kalman filter finite element method and AIC
    Yonekawa, K
    Kawahara, M
    INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS, 2003, 17 (04) : 307 - 317
  • [43] The Application of Dynamic Finite Element Method in Beam Structure
    Yang Licheng
    Qing Shangle
    Huang Xuan
    Luo Yiping
    MATERIALS AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 129-131 : 104 - 108
  • [44] On implementation aspects of finite element method and its application
    Svacek, Petr
    ADVANCES IN COMPUTATIONAL MATHEMATICS, 2019, 45 (04) : 2065 - 2081
  • [45] APPLICATION OF FINITE-ELEMENT METHOD TO ROLLING BEARING
    NAGAI, Y
    KAWAHARA, K
    JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1987, 32 (05): : 335 - 338
  • [46] Application of finite element method to convertible bond valuation
    Gong, Pu
    Zhao, Haibin
    Wuhan Ligong Daxue Xuebao (Jiaotong Kexue Yu Gongcheng Ban)/Journal of Wuhan University of Technology (Transportation Science and Engineering), 2004, 28 (02):
  • [47] On implementation aspects of finite element method and its application
    Petr Sváček
    Advances in Computational Mathematics, 2019, 45 : 2065 - 2081
  • [48] Application of the Finite Element Method to the Shearing Process.
    Arnold, Walter
    Lachmann, Lutz
    Leopold, Juergen
    Eberlein, Ludwig
    Jesche, Fred
    Neue Hutte, 1984, 29 (08): : 306 - 311
  • [49] Random Set Finite Element Method Application to Tunnelling
    Nasekhian, A.
    Schweiger, H. F.
    REC 2010: PROCEEDINGS OF THE 4TH INTERNATIONAL WORKSHOP ON RELIABLE ENGINEERING COMPUTING: ROBUST DESIGN - COPING WITH HAZARDS, RISK AND UNCERTAINTY, 2010, : 369 - 385
  • [50] Application of manifold finite element method in field problems
    Li, SZ
    Xiao, RS
    Ma, YL
    APPLIED ELECTROMAGNETICS (III), 2001, 10 : 231 - 234