Microstructural Evolution and Wear Behavior of AlCoCrCuFeNi High Entropy Alloy on Ti–6Al–4V Through Laser Surface Alloying

被引：0
|
作者：
G. Prabu
Muthukannan Duraiselvam
N. Jeyaprakash
Che-Hua Yang
机构：
[1] National Institute of Technology,Department of Production Engineering
[2] National Taipei University of Technology,Additive Manufacturing Center for Mass Customization Production
[3] National Taipei University of Technology,Institute of Manufacturing Technology
来源：
Metals and Materials International | 2021年 / 27卷
关键词：
Ti–6Al–4V; AlCoCrCuFeNi; Laser alloying; Microstructure; Wear mechanism; Roughness;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：2328 / 2340
页数：12
相关论文
共 50 条
  • [21] Analysis of Elements Non-Uniform Distribution of FeCoCrNi High-Entropy Alloy Coatings on Ti–6Al–4V Surface by Laser Cladding
    Shuyao Duan
    Xiaohong Zhan
    Mengyao Wu
    Hengchang Bu
    Qiyu Gao
    Metals and Materials International, 2021, 27 : 467 - 480
  • [22] XRD Study of the Surface Quality of Fatigue Specimens of Ti–6Al–4V Alloy
    M. S. Kalienko
    A. V. Zhelnina
    A. V. Volkov
    Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques, 2020, 14 : 1081 - 1084
  • [23] Formation mechanism and hemocompatibility of the superhydrophobic surface on biomedical Ti–6Al–4V alloy
    J. Chen
    J. L. Xu
    J. Huang
    P. Zhang
    J. M. Luo
    L. Lian
    Journal of Materials Science, 2021, 56 : 7698 - 7709
  • [24] The Microstructural and Phase Evolution of the 3D Printed Ti–6Al–4V Alloy during Mechanical Loading
    A. V. Panin
    M. S. Kazachenok
    L. A. Kazantseva
    O. B. Perevalova
    S. A. Martynov
    Physics of Metals and Metallography, 2023, 124 : 217 - 223
  • [25] Studies on mechanical behavior and microstructural analysis of tailor welded blanks of Ti–6Al–4V titanium alloy sheet
    A. Karpagaraj
    N. Siva Shanmugam
    K. Sankaranarayanasamy
    Journal of Materials Research, 2016, 31 : 2186 - 2196
  • [26] Simulation-assisted analysis of microstructural evolution of Ti–6Al–4V during laser powder bed fusion
    Peter Holfelder
    Armin Witte
    Progress in Additive Manufacturing, 2020, 5 : 237 - 246
  • [27] Exploring the Heat Treatment Parameters, Microstructural Evolution, and Mechanical Properties of Ti–6Al–4V Alloy Fabricated by a Selective Laser Melting Process
    Xing Gao
    Ning Zhang
    Yi Zhang
    Mingrui Chen
    Yan Ding
    Bo Jiang
    Yazheng Liu
    Metals and Materials International, 2022, 28 : 2596 - 2612
  • [28] Energetics of intergranular and interphase boundaries in Ti–6Al–4V alloy
    A. S. Gornakova
    S. I. Prokofjev
    Journal of Materials Science, 2020, 55 : 9225 - 9236
  • [29] Electrochemical Polishing of Additively Manufactured Ti–6Al–4V Alloy
    Yifei Zhang
    Jianzhong Li
    Shuanghang Che
    Yanwen Tian
    Metals and Materials International, 2020, 26 : 783 - 792
  • [30] Enhancement of wear resistance of Ti—6Al—4V alloy by picosecond laser surface micro texturing process皮秒激光微变形工艺增强Ti—6Al—4V 合金的耐磨性
    P Dinesh Babu
    S Vignesh
    M Vignesh
    C Balamurugan
    Journal of Central South University, 2018, 25 : 1836 - 1848
12345