A Method for Squareness Error Verification on a Coordinate Measuring Machine

被引：0
|
作者：
J.-P. Kruth
L. Zhou
C. Van den Bergh
P. Vanherck
机构：
[1] Faculty of Engineering,Department of Mechanical Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2003年 / 21卷
关键词：
Artefact; CMM; Error compensation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The face diagonal method for squareness error measurement is already well established. Because it is easy to apply, this method is widely used in CMMs (coordinate measuring machines). This paper introduces a new method, which reduces the set-up and measuring time for squareness error by applying four volumetric diagonal measurements instead of six face diagonal measurements. The method also makes it possible to use a single properly sized artefact, which fits the machine’s rectangular volume. The choice of artefacts used in the method is wide, and they need not be precalibrated before measurements.
引用
收藏
页码：874 / 878
页数：4
相关论文
共 50 条
  • [31] Error Model and Calibration Analysis of the Flexible Coordinate Measuring Machine
    Li, Fang
    Liu, Shugui
    Zhao, Lei
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6, 2012, 121-126 : 3273 - 3277
  • [32] DESIGN OF A NEW ERROR-CORRECTED COORDINATE MEASURING MACHINE
    BRYAN, JB
    CARTER, DL
    PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1979, 1 (03): : 125 - 128
  • [33] Evaluation on the probing error of a micro-coordinate measuring machine
    Chao, Z. X.
    Tan, S. L.
    Xu, G.
    NINTH INTERNATIONAL SYMPOSIUM ON LASER METROLOGY, PTS 1 AND 2, 2008, 7155
  • [34] Development of an Abbe Error Free Micro Coordinate Measuring Machine
    Huang, Qiangxian
    Wu, Kui
    Wang, Chenchen
    Li, Ruijun
    Fan, Kuang-Chao
    Fei, Yetai
    APPLIED SCIENCES-BASEL, 2016, 6 (04):
  • [35] SIMPLE METHOD OF 3D ERROR COMPENSATION OF TRIGGERING PROBES ON COORDINATE MEASURING MACHINE
    Wozniak, Adam
    METROLOGY AND MEASUREMENT SYSTEMS, 2006, 13 (03): : 289 - 299
  • [36] Research on the Thermal Error of the 3D-Coordinate Measuring Machine Based on the Finite Element Method
    Hao, Shuanghui
    Liu, Jizhu
    Song, Baoyu
    Hao, Minghui
    Zheng, Weifeng
    Tang, Zili
    INTELLIGENT ROBOTICS AND APPLICATIONS, PT II, PROCEEDINGS, 2008, 5315 : 440 - 448
  • [37] Research on error model for a novel parallel robot coordinate measuring machine
    Chen, Xiu-Long
    Zhao, Yong-Sheng
    Lu, Ling
    2007 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS I-V, CONFERENCE PROCEEDINGS, 2007, : 784 - +
  • [38] Research on Error Model of Involute Helicoid Based on Coordinate Measuring Machine
    Wen Xiaofeng
    Zhu Lianqing
    Chen Qingshan
    Yan Yafei
    SEVENTH INTERNATIONAL SYMPOSIUM ON INSTRUMENTATION AND CONTROL TECHNOLOGY: SENSORS AND INSTRUMENTS, COMPUTER SIMULATION, AND ARTIFICIAL INTELLIGENCE, 2008, 7127
  • [39] Volumetric error calibration of a coordinate measuring machine using a hole bar
    Di Giacomo, B.
    Zirondi, R.B.
    Marques, A.
    Informacion Tecnologica, 2003, 14 (01): : 71 - 74
  • [40] The Study on Error Compensation of the Probe System for Nano Coordinate Measuring Machine
    Du, Cuicui
    Feng, Xugang
    Li, Xinguang
    Zhang, Jiayan
    2016 6TH IEEE INTERNATIONAL CONFERENCE ON MANIPULATION, MANUFACTURING AND MEASUREMENT ON THE NANOSCALE (IEEE 3M-NANO), 2016, : 323 - 326
12345