A Method for Squareness Error Verification on a Coordinate Measuring Machine

被引：0
|
作者：
J.-P. Kruth
L. Zhou
C. Van den Bergh
P. Vanherck
机构：
[1] Faculty of Engineering,Department of Mechanical Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2003年 / 21卷
关键词：
Artefact; CMM; Error compensation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The face diagonal method for squareness error measurement is already well established. Because it is easy to apply, this method is widely used in CMMs (coordinate measuring machines). This paper introduces a new method, which reduces the set-up and measuring time for squareness error by applying four volumetric diagonal measurements instead of six face diagonal measurements. The method also makes it possible to use a single properly sized artefact, which fits the machine’s rectangular volume. The choice of artefacts used in the method is wide, and they need not be precalibrated before measurements.
引用
收藏
页码：874 / 878
页数：4
相关论文
共 50 条
  • [1] A method for squareness error verification on a coordinate measuring machine
    Kruth, JP
    Zhou, L
    Van den Bergh, C
    Vanherck, P
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2003, 21 (10-11): : 874 - 878
  • [2] Research on Inspection Method of Space Error in Coordinate Measuring Machine
    Hou Chengyang
    Zhang Ning
    Liang Lei
    Yin Xinyan
    2020 5TH INTERNATIONAL CONFERENCE ON MECHANICAL, CONTROL AND COMPUTER ENGINEERING (ICMCCE 2020), 2020, : 189 - 192
  • [3] Reasons of Systematic Deviations in Optical Squareness Measuring at Machine Tools and Coordinate Measuring Instruments.
    Linhart, C.
    TM. Technisches Messen, 1986, 53 (01): : 28 - 39
  • [4] A Coordinate Measuring Machine with Error Compensation in Feature Measurement: Model Development and Experimental Verification
    Mohammadi, Fazel
    Mirhashemi, Mahmoud
    Rashidzadeh, Rashid
    International Journal of Advanced Manufacturing Technology, 2022,
  • [5] A Coordinate Measuring Machine with Error Compensation in Feature Measurement: Model Development and Experimental Verification
    Mohammadi, Fazel
    Mirhashemi, Mahmoud
    Rashidzadeh, Rashid
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022,
  • [6] The length error compensation method of articulated arm coordinate measuring machine
    Feng, Xugang
    Zhu, Jiaqi
    Zhang, Jiayan
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2019, 90 (10):
  • [7] REASONS OF SYSTEMATIC DEVIATIONS IN OPTICAL SQUARENESS MEASURING AT MACHINE-TOOLS AND COORDINATE MEASURING-INSTRUMENTS
    LINHART, C
    TECHNISCHES MESSEN, 1986, 53 (01): : 28 - 39
  • [8] Quick check error verification of coordinate measuring machines
    Curran, E
    Phelan, P
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 155 (1-3) : 1207 - 1213
  • [9] Gear Inspection and Error Compensation Control Method Based on Coordinate Measuring Machine
    Meng, Zhaojun
    Cui, Xuemiao
    Jiang, Lianzhi
    He, Xuejun
    PROCEEDINGS OF THE 2019 14TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA 2019), 2019, : 2393 - 2398
  • [10] Verification of Coordinate Measuring Machine Using a Gauge Block
    Toth, Teodor
    Dovica, Miroslav
    Busa, Jan
    Busa Jr, Jan
    MEASUREMENT SCIENCE REVIEW, 2024, 24 (06): : 226 - 233
12345