Photocatalytic Degradation of Organic Pollutants over MFe2O4 (M = Co, Ni, Cu, Zn) Nanoparticles at Neutral pH

被引:0
|
作者
Nishesh Kumar Gupta
Yasaman Ghaffari
Suho Kim
Jiyeol Bae
Kwang Soo Kim
Md Saifuddin
机构
[1] University of Science and Technology (UST),
[2] Department of Land,undefined
[3] Water,undefined
[4] and Environment Research,undefined
[5] Korea Institute of Civil Engineering and Building Technology (KICT),undefined
来源
关键词
D O I
暂无
中图分类号
学科分类号
摘要
In this study, we report a surfactant-mediated synthesis of ferrites (MFe2O4: M = Co, Ni, Cu, Zn) using the co-precipitation-oxidation method. The band gap calculated from UV-Visible diffuse reflectance spectra were found in the range of 1.11–1.81 eV. These ferrite nanocatalysts were studied for the photocatalytic degradation of multiple organic dyes in a 32 W UV-C/H2O2 system. All the four ferrites showed an excellent dye degradation rate in the range of 2.065–2.417 min−1 at neutral pH. In the optimized condition, NiF was found to degrade 89%, 92%, 93%, and 78% of methylene blue, methyl orange, bromo green, and methyl red, respectively within 1 min of UV-irradiation. A 40% TOC removal was recorded after 5 min of degradation reaction, which increased to 60% after 50 min. Mechanism elucidated by scavenger studies and fluorescence spectroscopy revealed that •OH and holes were the primary reactive radicals responsible for the degradation process. Ferrite photocatalysts showed an insignificant performance loss in seven consecutive cycles. The photocatalyst was found efficient in the presence of a high concentration of salts. Thus, it was concluded that these photocatalysts are highly suitable for the remediation of dye-contaminated wastewater.
引用
收藏
相关论文
共 50 条
  • [31] In-field Mossbauer characterization of MFe2O4 (M = Fe, Co, Ni) nanoparticles
    Arelaro, Amanda D.
    Rossi, Liane M.
    Rechenberg, Hercilio R.
    INTERNATIONAL CONFERENCE ON THE APPLICATIONS OF THE MOSSBAUER EFFECT (ICAME 2009), 2010, 217
  • [32] Monodisperse MFe2O4 (M = Fe, Co, Mn) Nanoparticles
    Sun, S. (ssun@us.ibm.com), 1600, American Chemical Society (126):
  • [33] Monodisperse MFe2O4 (M = Fe, Co, Mn) nanoparticles
    Sun, SH
    Zeng, H
    Robinson, DB
    Raoux, S
    Rice, PM
    Wang, SX
    Li, GX
    JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 2004, 126 (01) : 273 - 279
  • [34] Fabrication and application of MFe2O4 (M = Zn, Cu) nanoparticles as anodes for Li ion batteries
    Zhao, Hongxiao
    Jia, Huimin
    Wang, Shumin
    Xue, Dengqi
    Zheng, Zhi
    JOURNAL OF EXPERIMENTAL NANOSCIENCE, 2011, 6 (01) : 75 - 83
  • [35] Evolution of the Morphology and Magnetic Properties of Flaky FeSiAl/MFe2O4 (M = Mn, Co, Ni, Cu, Zn) Composites
    Ge, Chuannan
    Lei, Chenglong
    Wang, Bo
    Wang, Yakun
    Peng, Zhouhao
    Wang, Zhitong
    Guo, Yunjun
    NANOMATERIALS, 2023, 13 (04)
  • [36] A kinetic investigation on the thermal decomposition of propellants catalyzed by rGO/MFe2O4 (M = Cu, Co, Ni, Zn) nanohybrids
    Wang, Weiran
    Zhang, Dongxiang
    JOURNAL OF SAUDI CHEMICAL SOCIETY, 2019, 23 (05) : 627 - 635
  • [37] Synthesis, Characterization and, the Heavy Metal Removal Efficiency of MFe2O4 (M=Ni, Cu) Nanoparticles
    Sezgin, Naim
    Sahin, Musa
    Yalcin, Arzu
    Koseoglu, Yuksel
    EKOLOJI, 2013, 22 (89): : 89 - 96
  • [38] The effect of solution pH on the electrochemical performance of nanocrystalline metal ferrites MFe2O4 (M=Cu, Zn, and Ni) thin films
    E. M. Elsayed
    M. M. Rashad
    H. F. Y. Khalil
    I. A. Ibrahim
    M. R. Hussein
    M. M. B. El-Sabbah
    Applied Nanoscience, 2016, 6 : 485 - 494
  • [39] Synthesis of crystal MFe2O4 (M = Mg, Cu, Ni) microspheres
    Deng, Hong
    Chen, Hongyu
    Li, He
    MATERIALS CHEMISTRY AND PHYSICS, 2007, 101 (2-3) : 509 - 513
  • [40] The effect of solution pH on the electrochemical performance of nanocrystalline metal ferrites MFe2O4 (M=Cu, Zn, and Ni) thin films
    Elsayed, E. M.
    Rashad, M. M.
    Khalil, H. F. Y.
    Ibrahim, I. A.
    Hussein, M. R.
    El-Sabbah, M. M. B.
    APPLIED NANOSCIENCE, 2016, 6 (04) : 485 - 494