Observation of the TWIP + TRIP Plasticity-Enhancement Mechanism in Al-Added 6 Wt Pct Medium Mn Steel

被引：0

作者：

Seawoong Lee

Kyooyoung Lee

Bruno C. De Cooman

机构：

[1] Pohang University of Science and technology (POSTECH),Graduate Institute of Ferrous Technology

[2] POSCO Technical Research Laboratories,Materials Design Laboratory

[3] Pohang University of Science and Technology,undefined

来源：

Metallurgical and Materials Transactions A | 2015年 / 46卷

关键词：

Austenite; Stack Fault Energy; Intercritical Annealing; TWIP Steel; Mechanical Twinning;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The intercritically annealed Fe-0.15 pctC-6.0 pctMn-1.5 pctSi-3.0 pctAl and Fe-0.30 pctC-6.0 pctMn-1.5 pctSi-3.0 pctAl medium Mn steels were found to have improved mechanical properties due to the TWIP and TRIP plasticity-enhancing mechanisms being activated in succession during tensile deformation. The increase of the C content from 0.15 to 0.30 pct resulted in ultra-high strength properties and a strength-ductility balance of approximately 65,000 MPa-pct, i.e., equivalent to the strength-ductility balance of high Mn TWIP steel with a fully austenitic microstructure.

引用

页码：2356 / 2363

页数：7

共 19 条

[11] The plasticity deformation mechanism of Fe-12Mn-6Al-0.2C steel at elevated temperature
Zhao, Shuai
Wang, Yongjin
Song, Renbo
Hu, Bin
Zhang, Yingchao
Huo, Weifeng
Tan, Chenhao
Taylor, Tom
VACUUM, 2022, 206
[12] Microstructure-mechanical property evaluation and deformation mechanism in Al added medium Mn steel processed through intercritical rolling and annealing
Sahoo, Biraj Kumar
Srivastava, Vikas Chandra
Mahato, B.
Chowdhury, Sandip Ghosh
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 799
[13] Microstructure-mechanical property evaluation and deformation mechanism in Al added medium Mn steel processed through intercritical rolling and annealing
Sahoo, Biraj Kumar
Srivastava, Vikas Chandra
Mahato, B.
Ghosh Chowdhury, Sandip
Materials Science and Engineering: A, 2021, 799
[14] The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel
Dong, Yanchun
Sun, Zhilin
Xia, Hao
Feng, Jianhang
Du, Jiejie
Fang, Wei
Liu, Baoxi
Wang, Gongkai
Li, Long
Zhang, Xin
Yin, Fuxing
METALS, 2018, 8 (10)
[15] The significance of microstructural evolution on governing impact toughness of Fe-0.2C-6Mn-3Al medium-Mn TRIP steel studied by a novel heat treatment
Li, Zhichao
Li, Xinjing
Mou, Yanjie
Cai, Zhihui
Misra, Devesh
Zhang, Xin
Li, Huiping
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021, 112 (04) : 271 - 279
[16] Elevation of Impact Toughness of Medium-Manganese Trip-Steel 0.2% C – 6% Mn – 3% Al Due to Evolution of Microstructure Under Heat Treatment
Yanjie Mou
Xinjing Li
Zhichao Li
Devesh Misra
Zhihui Cai
Lianfang He
Huiping Li
Metal Science and Heat Treatment, 2021, 63 : 26 - 33
[17] Elevation of Impact Toughness of Medium-Manganese Trip-Steel 0.2% C-6% Mn-3% Al Due to Evolution of Microstructure Under Heat Treatment
Mou, Yanjie
Li, Xinjing
Li, Zhichao
Misra, Devesh
Cai, Zhihui
He, Lianfang
Li, Huiping
METAL SCIENCE AND HEAT TREATMENT, 2021, 63 (1-2) : 26 - 33
[18] The Significance of Austenite/Ferrite/Martensite Ratio on Governing Impact Toughness of Fe-0.2C-6Mn-1.5Al Medium-Mn Transformation-Induced Plasticity Steel Studied by a Novel Heat Treatment
Zhichao Li
Yanjie Mou
Xinjing Li
Devesh Misra
Lianfang He
Huiping Li
Journal of Materials Engineering and Performance, 2020, 29 : 4396 - 4403
[19] The Significance of Austenite/Ferrite/Martensite Ratio on Governing Impact Toughness of Fe-0.2C-6Mn-1.5Al Medium-Mn Transformation-Induced Plasticity Steel Studied by a Novel Heat Treatment
Li, Zhichao
Mou, Yanjie
Li, Xinjing
Misra, Devesh
He, Lianfang
Li, Huiping
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (07) : 4396 - 4403

← 1 2 →