Mechanism of the wear of tool tapers in milling machines

被引：0
|
作者：
A. R. Maslov
Yu. A. Melnik
机构：
[1] Moscow State Technological University Stankin,
来源：
Journal of Friction and Wear | 2014年 / 35卷
关键词：
wear; tool taper; high-speed milling; milling machine;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The results of experiments that show that the wear of tool tapers in milling machines strongly influences the dynamic flexibility of the spindle-tool system and reduces the reliability of machines with respect to the parameters of roughness of the machined surface have been presented. A scheme that explains the mechanism of the wear of tool tapers from the standpoint of material fatigue under the action of cyclic stresses has been proposed. Calculations according to this scheme have been performed that confirm the results of experiments.
引用
收藏
页码：460 / 464
页数：4
相关论文
共 50 条
  • [41] Wear mechanism of tool in high-speed milling of titanium alloy TC6
    Xu, Jin-Yang
    Zheng, Xiao-Hu
    An, Qing-Long
    Chen, Ming
    Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2012, 46 (07): : 1037 - 1042
  • [42] Mechanism of the tool flank wear influenced by the vibration characteristics of the toolholder system in high speed milling
    Liu, Anmin
    Shen, Hang
    Kruth, J.P.
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2008, 44 (04): : 63 - 68
  • [43] Simulation and experimental study on milling mechanism and tool wear of low volume SiCp/Al composites
    Chen, Ye
    Gao, Qi
    Wang, Quanzhao
    Yin, Xunyu
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2023, 237 (18) : 4271 - 4283
  • [44] The monitoring of micro milling tool wear conditions by wear area estimation
    Zhu, Kunpeng
    Yu, Xiaolong
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2017, 93 : 80 - 91
  • [45] Mechanism, cutting performance, and tool wear of MQL milling aluminum alloys with dual-nozzle
    Guochao Qiao
    Jie Yang
    Dong Zhen
    Fujiang Zhang
    The International Journal of Advanced Manufacturing Technology, 2024, 131 : 5845 - 5866
  • [46] Mechanism, cutting performance, and tool wear of MQL milling aluminum alloys with dual-nozzle
    Qiao, Guochao
    Yang, Jie
    Zhen, Dong
    Zhang, Fujiang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 131 (12): : 5845 - 5866
  • [47] CURRENT ESTIMATION OF TOOL WEAR IN UNMANNED MACHINES
    NEVELSON, MS
    MUSTAFAEV, EK
    REVIS, EI
    MEASUREMENT TECHNIQUES USSR, 1985, 28 (06): : 476 - 479
  • [48] Effect of Cutting Parameters on Tool Chipping Mechanism and Tool Wear Multi-Patterns in Face Milling Inconel 718
    Liu, Delin
    Liu, Zhanqiang
    Wang, Bing
    LUBRICANTS, 2022, 10 (09)
  • [49] The analysis of tool wear in milling CFRP with different diamond coated tool
    Yang X.
    Li Y.
    Yan G.
    Liu J.
    Yu D.
    1600, Trans Tech Publications Ltd (667): : 231 - 236
  • [50] EXPERIMENTAL INVESTIGATION OF THE TOOL WEAR AND TOOL LIFE IN MICRO HARD MILLING
    Shashidhara, Shreyas
    Liu, Xinyu
    Zhu, Weihang
    Curry, James
    Zaloom, Victor
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 2A, 2014,
12345