Synthesis of cationized anthraquinone dyes and their dyeing properties for meta-aramid fiber

被引:0
|
作者
Eun-mi Kim
Jae-hong Choi
机构
[1] Kyungpook National University,Department of Textile System Engineering
来源
Fibers and Polymers | 2013年 / 14卷
关键词
Anthraquinone; Cationization; Basic dye; -Aramid fiber; Exhaustion yield; Fastness;
D O I
暂无
中图分类号
学科分类号
摘要
Due to compact structure of meta-aramid fiber caused by the intermolecular hydrogen bondings of amide groups, the degree of crystallinity increased, thus its poor dyeing properties arises. Among commercial dyes used in many previous researches, the basic dyes showed comparatively higher exhaustion yields as comparing to those of disperse dyes and acid dyes. The anthraquinone moiety was adopted for good performances of light fastness on meta-aramid fiber. In this study, eight of anthraquinone dye was synthesized. The three of them were obtained from chloro-anthraquinone, by Ullmann reactions with the corresponding heterocylic residues such as morpholine and one of them was obtained from lueco quinizarine by condensation with the corresponding heterocylic residues. The others were prepared by quaternization from dyes above. The synthesized disperse and cationic dyes were dyed on meta-aramid fibers and investigated for their build-up dyeing properties and wash fastness.
引用
收藏
页码:2054 / 2060
页数:6
相关论文
共 50 条
  • [21] Effect of N,N-diethyl-m-toluamide on the structure and dyeing properties of meta-aramid and para-aramid fibre
    Lei, Le-Yan
    Mao, Ya-Hong
    Xu, Xiao-Feng
    Zheng, Jin-Qu
    Zheng, Qing-Kang
    Guan, Yu
    Fan, Xiao-Min
    COLORATION TECHNOLOGY, 2014, 130 (05) : 349 - 356
  • [22] Dyeing properties of meta-aramid fabric dyed with basic dye using ultrasonic-microwave irradiation
    Amesimeku, Jeremiah
    Fan, Lihua
    Jakpa, Wizi
    Wang, Chaoxia
    JOURNAL OF CLEANER PRODUCTION, 2021, 285
  • [23] Synthesis of modified meta-aramid and study on it's heat-resistant properties
    State Key Laboratory for Modification of Polymeric Fibers and Materials, Donghua University, Shanghai 200051, China
    Hua Dong Li Gong Da Xue/J East China Univ Sci Technol, 2006, 1 (55-59):
  • [24] Improved Dyeing of Meta-aramid Based on Particle Flow Dyeing Mechanism Using Hot-pressing Dyeing Method
    Chen, Xin
    Sheng, Dan
    Xia, Honghui
    Xu, Weilin
    Deng, Bo
    Cao, Genyang
    FIBERS AND POLYMERS, 2020, 21 (12) : 2842 - 2847
  • [25] Improved Dyeing of Meta-aramid Based on Particle Flow Dyeing Mechanism Using Hot-pressing Dyeing Method
    Xin Chen
    Dan Sheng
    Honghui Xia
    Weilin Xu
    Bo Deng
    Genyang Cao
    Fibers and Polymers, 2020, 21 : 2842 - 2847
  • [26] Surface modification of meta-aramid fiber with Excimer UV lamp
    Yang Mei
    Yan Kelu
    Cui Daoquan
    PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON ADVANCED FIBERS AND POLYMER MATERIALS VOLS 1 AND 2, 2007, : 93 - 95
  • [27] Preparation and properties of TPC modified meta-aramid copolymers
    Chen, L
    Hu, ZM
    Xie, XY
    Liu, ZF
    Proceedings of 2005 International Conference on Advanced Fibers and Polymer Materials (ICAFPM 2005), Vol 1 and 2: NEW CENTURY , NEW MATERIALS AND NEW LIFE, 2005, : 542 - 547
  • [28] Design and Synthesis of Flexible Meta-Aramid With Higher Dyeability
    Fan, Shihao
    Liu, Yi
    Jia, Wanglong
    Zheng, Liuchun
    JOURNAL OF APPLIED POLYMER SCIENCE, 2025,
  • [29] Surface Modification and Adhesion Properties of Meta-aramid Fabrics
    Liu, Bing-Qian
    Sheng, Dan
    Gan, Xing
    Cao, Gen-Yang
    TEXTILE BIOENGINEERING AND INFORMATICS SYMPOSIUM (TBIS) PROCEEDINGS, 2018, 2018, : 61 - 68
  • [30] Effect of Moisture on Mechanical Properties and Thermal Stability of Meta-Aramid Fiber Used in Insulating Paper
    Yin, Fei
    Tang, Chao
    Li, Xu
    Wang, Xiaobo
    POLYMERS, 2017, 9 (10)