Effect of Alloying on the Strength Properties and the Hardening Mechanisms of Nitrogen-Bearing Austenitic Steels after Hot Deformation and Annealing

被引：1

作者：

Bannykh I.O. ^{[1
]}

机构：

[1] Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Leninskii pr. 49, Moscow

来源：

Russian Metallurgy (Metally) | 2017年 / 2017卷 / 11期

关键词：

grain size; hardening; interstitial elements; nitrogen-bearing austenitic steels; stacking fault energy;

D O I：

10.1134/S0036029517110040

中图分类号：

学科分类号：

摘要：

The main mechanisms of hardening nitrogen-bearing austenitic steels that operate under various thermomechanical treatment conditions at various steel compositions are considered. The strength properties of the steels are shown to depend on the content of interstitial elements, namely, carbon and nitrogen, and the influence of these elements on the stacking fault energy is estimated. The ratios of the main alloying elements that favor an increase or a decrease in the stacking fault energy are found to achieve the desirable level of strain hardening provided that an austenitic structure of steel is retained. © 2017, Pleiades Publishing, Ltd.

引用

页码：968 / 973

页数：5

共 49 条

[41] Effect of chemical composition and production parameters of hot rolling and recrystallization annealing in continuous hot dip galvanizing units on the structure and properties of high-strength low-alloy steels
S. V. Yashchuk
I. G. Rodionova
A. I. Zaitsev
N. G. Shaposhnikov
A. I. Gordienko
V. V. Krylov-Olefirenko
Metallurgist, 2011, 54 : 608 - 617
[42] A study of the best compromise of the mechanical properties of the hot work tool steels after hardening. Behviour of the toughness as effect of the long times at the typical temperatures of the nitriding
Cislaghi, L.
Mattavelli, D.
METALLURGIA ITALIANA, 2014, (02): : 11 - 17
[43] Effect of Heat Treatment on the Structure and the Mechanical and Technological Properties of Corrosion-Resistant Nitrogen-Bearing 0Kh16N4AFD Steel for High-Strength Welding Constructions of Railway Engineering
Bannykh, O. A.
Blinov, V. M.
Kostina, M. V.
Lukin, E. I.
Blinov, E. V.
Rigina, L. G.
RUSSIAN METALLURGY, 2015, 2015 (07): : 571 - 575
[44] A review on the effect of various rolling regimes (cryo, cold, warm, hot) and post-annealing on high-entropy alloys: microstructure evolution, deformation mechanisms, and mechanical properties
Moslem Tayyebi
Mahdi DerakhshaniMolayousefi
Archives of Civil and Mechanical Engineering, 24
[45] A review on the effect of various rolling regimes (cryo, cold, warm, hot) and post-annealing on high-entropy alloys: microstructure evolution, deformation mechanisms, and mechanical properties (vol 24, 16, 2024)
Tayyebi, Moslem
DerakhshaniMolayousefi, Mahdi
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2023, 24 (01)
[46] COOLING CONDITIONS AFTER SOLUTION TREATMENT AND LOW TEMPERATURE TOUGHNESS OF A 32% Mn STEEL BEARING HIGH CONTENT OF NITROGEN (MECHANICAL PROPERTIES OF HIGH STRENGTH HIGH Mn NON-MAGNETIC STEELS FOR VERY LOW TEMPERATURE USES - V).
Shibata, Koji
Fujita, Kouzou
Fujita, Toshio
1600, (26):
[47] Structure and mechanical properties of corrosion-resistant high-nitrogen 04Kh22AG15N8M2F and 05Kh19AG10N7MFB steels after hot deformation
Blinov E.V.
Khadyev M.S.
Russian Metallurgy (Metally), 2012, 2012 (3) : 248 - 254
[48] MECHANICAL-PROPERTIES OF HIGH-STRENGTH HIGH MN NO-MAGNETIC STEELS FOR VERY LOW-TEMPERATURE USES .5. COOLING CONDITIONS AFTER SOLUTION TREATMENT AND LOW-TEMPERATURE TOUGHNESS OF A 32-PERCENT MN STEEL BEARING HIGH CONTENT OF NITROGEN
SHIBATA, K
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1463 - 1463
[49] MECHANICAL-PROPERTIES OF HIGH-STRENGTH HIGH MN NO-MAGNETIC STEELS FOR VERY LOW-TEMPERATURE USES .5. COOLING CONDITIONS AFTER SOLUTION TREATMENT AND LOW-TEMPERATURE TOUGHNESS OF A 32-PERCENT-MN STEEL BEARING HIGH CONTENT OF NITROGEN
SHIBATA, K
FUJITA, K
FUJITA, T
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 26 (06) : B224 - B224

← 1 2 3 4 5 →