Influence of rhodium additive on hydrogen electrosorption in palladium-rich Pd–Rh alloys

Hydrogen electrosorption into Pd-rich (>80 at.% Pd in the bulk) Pd–Rh alloys has been studied in acidic solutions (0.5 M H2SO4) using cyclic voltammetry and chronoamperometry. The influence of temperature (in the range between 283 and 328 K), electrode potential and alloy bulk composition on hydrogen electrosorption properties of Pd–Rh alloys is presented. It has been found that the additive of Rh to Pd–Rh alloys increases the maximum hydrogen solubility (for Rh bulk content below 10 at.%), decreases the potential of absorbed hydrogen oxidation peak and decreases the potential of the α → β phase transition. Increasing temperature decreases the potential of absorbed hydrogen oxidation peak, the maximum hydrogen solubility, and the potential of the α → β phase transition. The amounts of electrosorbed hydrogen for α- and β-phase boundaries, i.e., αmax and βmin, have been determined from the integration of the initial parts of current–time responses in hydrogen absorption and desorption processes. The H/M ratio corresponding to αmax increases with increasing Rh content, while for βmin a maximum of H/M ratio is observed for the alloys containing ca. 95% Rh.