Reduction kinetics of NiO–YSZ composite for application in solid oxide fuel cell

被引:0
|
作者
W. K. Yoshito
J. R. Matos
V. Ussui
D. R. R. Lazar
J. O. A. Paschoal
机构
[1] Instituto de Pesquisas Energéticas e Nucleares,Instituto de Química
[2] Universidade de São Paulo,undefined
关键词
Nickel oxide; Yttria stabilized zirconia; Coprecipitation; Thermal analysis; Reduction kinetic;
D O I
暂无
中图分类号
学科分类号
摘要
A porous nickel–8 mol% yttria stabilized zirconia (Ni–8YSZ) composite, used as anode for solid oxide fuel cell, was obtained by reduction of NiO–8YSZ cermet. The first goal was the evaluation of the temperature effect of powder processing by thermogravimetry. In addition, the influence of porosity in the reduction kinetic of the sample sintered at 1450 °C was evaluated. The final porosity produced in NiO–8YSZ composite by pore former was 30.4 and 37.9 vol.%, respectively, for 10 and 15 mass% of corn starch. The sample with 15 mass% of corn starch promotes a reduction rate almost twice higher than sample with 10 mass% of corn starch. The porosity introduced by the reduction of NiO was 23 vol.%.
引用
收藏
页码:303 / 308
页数:5
相关论文
共 50 条
  • [31] Electrophoretic deposition of YSZ electrolyte on porous NiO-YSZ substrate for Solid Oxide Fuel Cells
    Talebi, Tahereh
    Raissi, Babak
    Maghsoudipour, Amir
    ELECTROPHORETIC DEPOSITION: FUNDAMENTALS AND APPLICATIONS III, 2009, 412 : 215 - 220
  • [32] Preparation of NiO-YSZ Composite Powder Through 2-Step Hydrothermal Synthesis and Its Application to Solid Oxide Fuel Cell Anode Functional Layer
    Kim, Byeongseok
    Cho, Kihyun
    Choi, Jinyi
    Shin, Dongwook
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2015, 15 (01) : 536 - 539
  • [33] Polypropylene Oil as a Fuel for Ni-YSZ | YSZ | LSCF Solid Oxide Fuel Cell
    Pratiwi, Andini W.
    Rahmawati, Fitria
    Rochman, Refada A.
    Syahputra, Rahmat J. E.
    Prameswari, Arum P.
    INTERNATIONAL CONFERENCE ON CHEMISTRY AND MATERIAL SCIENCE (IC2MS) 2017, 2018, 299
  • [34] Electrode kinetics of porous Ni-3YSZ cermet operated in fuel cell and electrolysis modes for solid oxide cell application
    Monaco, Federico
    Effori, Elisa
    Hubert, Maxime
    Siebert, Elisabeth
    Geneste, Gregory
    Morel, Bertrand
    Djurado, Elisabeth
    Montinaro, Dario
    Laurencin, Jerome
    ELECTROCHIMICA ACTA, 2021, 389
  • [35] Electrophoretic deposition of YSZ particles on non-conducting porous NiO-YSZ substrates for solid oxide fuel cell applications
    Besra, Laxmidhar
    Compson, Charles
    Liu, Meilin
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2006, 89 (10) : 3003 - 3009
  • [36] Single-step Preparation of Nano-homogeneous NiO/YSZ Composite Anode for Solid Oxide Fuel Cells
    Song, Jung-Hoon
    Park, Mi-Young
    Park, Hye Won
    Lim, Hyung-Tae
    NANO-MICRO LETTERS, 2013, 5 (02): : 111 - 116
  • [37] Single-step Preparation of Nano-homogeneous NiO/YSZ Composite Anode for Solid Oxide Fuel Cells
    Jung-Hoon Song
    Mi Young Park
    Hye Won Park
    Hyung-Tae Lim
    Nano-Micro Letters, 2013, 5 (2) : 111 - 116
  • [38] Single-step Preparation of Nano-homogeneous NiO/YSZ Composite Anode for Solid Oxide Fuel Cells
    Jung-Hoon Song
    Mi Young Park
    Hye Won Park
    Hyung-Tae Lim
    Nano-Micro Letters, 2013, 5 (02) : 111 - 116
  • [39] Interpretation of the interconnected microstructure of an NiO-YSZ anode composite for solid oxide fuel cells via impedance spectroscopy
    Lee, K. -R.
    Pyo, Y. S.
    So, B. S.
    Kim, S. M.
    Lee, B. K.
    Hwang, J. H.
    Kim, J.
    Lee, J. -H.
    Lee, H. -W.
    JOURNAL OF POWER SOURCES, 2006, 158 (01) : 45 - 51
  • [40] Evaluation of Mechanical Strength of NiO–YSZ Anode in Solid Oxide Fuel Cell Based on Small Punch Test
    Sοng M.
    Hu J.
    Jiang W.
    Zhang Y.
    Niu R.
    Tοng J.
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2024, 52 (01): : 9 - 18