Friction Surfaces and Wear Products of Sn–Sb–Cu-Based Composite Materials

被引：2
|
作者：
Kalashnikov I.E. [1 ]
Kobeleva L.I. [1 ]
Bolotova L.K. [1 ]
Bykov P.A. [1 ]
Kolmakov A.G. [1 ]
机构：
[1] Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Leninskii pr. 49, Moscow
来源：
Russian Metallurgy (Metally) | 2018年 / 2018卷 / 4期
基金：
俄罗斯基础研究基金会;
关键词：
composite material; friction bands; reinforcing particles; tribological properties; wear products; wear resistance;
D O I：
10.1134/S0036029518040043
中图分类号：
学科分类号：
摘要：
The structure and the tribological properties of the composite materials based on an Sn–Sb–Cu alloy (B83 babbit) and fabricated by hot pressing of powders are studied under dry sliding friction conditions. Modified schungite and silicon carbide are chosen as reinforcing materials. The composite material fabricated by a powder technology and reinforced by silicon carbide and modified schungite particles is found to have the doubled wear resistance as compared to a cast B83 alloy at a comparable friction coefficient. © 2018, Pleiades Publishing, Ltd.
引用
收藏
页码：377 / 382
页数：5
相关论文
共 50 条
  • [41] Friction andwear property of a new Cu-based Cu/Ti3SiC2/C composite
    Lu, Qi
    He, Guoqiu
    Yang, Yang
    Fan, Kangle
    Zhao, Xiaogen
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2015, 29 (03): : 216 - 220
  • [42] Wear and Corrosion Resistance of Cold-Sprayed Cu-Based Composite Coatings on Magnesium Substrate
    Zhang, Liuyan
    Yang, Shuimei
    Lv, Xiao
    Jie, Xiaohua
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2019, 28 (06) : 1212 - 1224
  • [43] Wear and Corrosion Resistance of Cold-Sprayed Cu-Based Composite Coatings on Magnesium Substrate
    Liuyan Zhang
    Shuimei Yang
    Xiao Lv
    Xiaohua Jie
    Journal of Thermal Spray Technology, 2019, 28 : 1212 - 1224
  • [44] Study on the High Temperature Friction and Wear Behaviors of Cu-Based Friction Pairs in Wet Clutches by Pin-on-Disc Tests
    Zhao, Er-Hui
    Ma, Biao
    Li, He-Yan
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2017, 2017
  • [45] Mapping wear modes of composite materials with intermetallic reinforcing based on antifrictional alloy of system Al-Sn-Cu
    Bykov, P. A.
    Kalashnikov, I. E.
    Kobeleva, L., I
    Katin, I., V
    Mikheev, R. S.
    LETTERS ON MATERIALS, 2021, 11 (02): : 181 - 186
  • [46] CHANGES IN THE COMPOSITION AND STRUCTURE OF Al-Sn AND Cu-Sn-Pb BEARING MATERIALS DUE TO FRICTION AND WEAR.
    Oda, Yuzo
    Mizutani, Yashiyuki
    Nakajima, Koichi
    1972, 36 (09): : 859 - 864
  • [47] The silver debate: Sn/Cu-based solder explained
    Cobar BV
    不详
    SMT Surf Mount Technol Mag, 2008, 11
  • [48] Effects of the content of the nano-SiO2 on the tribology performance of the Cu-based friction materials
    Du, Jianhua
    Feng, Jianlin
    Ji, Delin
    Jiang, Shoulin
    Han, Wenzheng
    2008, Beijing Research Institute of Powder Metallurgy, Beijing, China (26):
  • [49] Tribological behavior of Cu-based powder metallurgy friction materials at harsh braking energy density
    Zhou, Peiyu
    Xu, Yuxuan
    Zhou, Haibin
    Wang, Xing
    Deng, Minwen
    Chen, Qi
    Kang, Li
    Yao, Pingping
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2024, 55 (08): : 3047 - 3059
  • [50] On the Wear Rate of an Sn11Sb5.5Cu Babbitt
    Valeeva, A. Kh.
    Valeev, I. Sh.
    Fazlyakhmetov, R. F.
    JOURNAL OF FRICTION AND WEAR, 2017, 38 (01) : 53 - 57
12345