Influence of the root radius of crack-like notches on the fracture load of brittle components

被引:0
|
作者
G. Kullmer
H. A. Richard
机构
[1] Universität Paderborn,Institute of Applied Mechanics, Faculty of Mechanical Engineering
来源
关键词
Narrow notch; Crack-like notch; Asymptotical stress field; Fracture criterion; Mixed-mode loading;
D O I
暂无
中图分类号
学科分类号
摘要
Narrow notches often cause damage that can lead to the destruction of components. The stress field in the vicinity of such crack-like notches in two-dimensional (2D) structures is similar to the stress field around equivalent cracks. Therefore similar investigations are necessary to predict the fracture load for components with cracks or narrow notches. Thus, the asymptotical stress field for a narrow notch with a rounded notch root is deduced from an Airy’s stress function. Based on this stress field a fracture criterion is developed. Comparing the theoretical fracture limit curves derived from the fracture criterion with experimental results it can be shown that for brittle material the local stress state at the fracture initiation point is the same for mode I, mixed-mode and mode II loading.
引用
收藏
页码:711 / 723
页数:12
相关论文
共 50 条
  • [21] Theoretical and experimental studies in fracture mechanics of crack-like defects under biaxial loading
    A. A. Ostsemin
    P. B. Utkin
    Mechanics of Solids, 2009, 44 : 277 - 287
  • [22] Construction of fracture diagrams for plates with a crack-like cut with the use of necessary and sufficient criteria
    M. M. Shakirtov
    A. P. Shabanov
    V. M. Kornev
    Journal of Applied Mechanics and Technical Physics, 2013, 54 : 308 - 314
  • [23] Influence of the rupture initiation on the intersonic transition: Crack-like versus pulse-like modes
    Festa, G.
    Vilotte, J. -P.
    GEOPHYSICAL RESEARCH LETTERS, 2006, 33 (15)
  • [24] Assessment of influence of surface crack-like stress concentrators on main pipeline operability
    Neganov, Dmitry A.
    Zorin, Eugeny E.
    Zorin, Nikolay E.
    NAUKA I TEHNOLOGII TRUBOPROVODNOGO TRANSPORTA NEFTI I NEFTEPRODUKTOV-SCIENCE & TECHNOLOGIES-OIL AND OIL PRODUCTS PIPELINE TRANSPORTATION, 2021, 11 (01): : 8 - 15
  • [25] Influence of crack-like surface defects on the fatigue limit of nitrocarburized carbon steel
    Yamada, Y.
    Eto, H.
    Konya, J.
    Takahashi, K.
    2018 INTERNATIONAL CONFERENCE ON MATERIAL STRENGTH AND APPLIED MECHANICS (MSAM 2018), 2018, 372
  • [26] COMPUTATIONAL FRACTURE MECHANICS ASSESSMENT OF 3-D CRACK-LIKE DEFECTS IN COMPLEX GEOMETRIES
    Bahtui, Ali
    Tkach, Yuri
    OMAE2011: PROCEEDINGS OF THE ASME 30TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, VOL 3: MATERIALS TECHNOLOGY, 2011, : 123 - 129
  • [27] Fracture morphology pattern transition dominated by the crack tip curvature radius in brittle metallic glasses
    Gao, M.
    Ding, D. W.
    Zhao, D. Q.
    Bai, H. Y.
    Wang, W. H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 617 : 89 - 96
  • [28] RESEARCH INTO FRACTURE-BEHAVIOR OF MILD-STEEL IN CRACK-LIKE NOTCH IMPACT TEST
    YAN, XQ
    LEI, WS
    SCRIPTA METALLURGICA ET MATERIALIA, 1993, 29 (06): : 797 - 800
  • [29] Influence of subcritical crack growth on the determination of fracture toughness in brittle materials
    Krautgasser, C.
    Chlup, Z.
    Supancic, P.
    Danzer, R.
    Berrnejo, R.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2016, 36 (05) : 1307 - 1312
  • [30] The influence of crack-like defects on the tensile strength of an open-cell aluminum foam
    Andrews, EW
    Gibson, LJ
    SCRIPTA MATERIALIA, 2001, 44 (07) : 1005 - 1010