Effect of curing regime on bonding strength of EVA modified mortar to tile

被引：0

作者：

Daihua He

机构：

[1] University of Shanghai for Science Technology,School of Materials Science & Engineering

[2] Tongji University,Key Laboratory of Advanced Civil Engineering Materials, Ministry of Education

来源：

Journal of Wuhan University of Technology-Mater. Sci. Ed. | 2010年 / 25卷

关键词：

EVA; redispersible powder; latex; bonding strength; curing regime;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Ethylene-Vinyl Acetate (EVA) redispersible powder and latex were used to modify mortar. Three kinds of curing regimes: standard curing, high temperature curing and freeze-thaw circle curing were adopted to cure the bonded samples. Bonding strength of EVA modified mortar was tested at 28 days. The development of bonding strengths under all three curing regimes were discussed and compared. The experimental results show that bonding strength increases with the increase of EVA content in mortar. The curing regime used within 28 days is critical according to the bonding strengths values under three curing regimes for different ages. The reasons of that the EVA can improve the bonding strength were analyzed.

引用

页码：346 / 348

页数：2

共 50 条

[21] The effect of temperature and duration of curing on the strength of fly ash based geopolymer mortar
Adam, Andi Arham
Horianto
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE CIVIL ENGINEERING STRUCTURES AND CONSTRUCTION MATERIALS, 2014, 95 : 410 - 414
[22] Effect of carbonation curing regime on strength and microstructure of Portland cement paste
Chen, Tiefeng
Gao, Xiaojian
JOURNAL OF CO2 UTILIZATION, 2019, 34 : 74 - 86
[23] INFLUENCE OF SPECIMEN SIZE ON EFFECT OF CURING REGIME ON CONCRETE COMPRESSIVE STRENGTH
SOROKA, I
BAUM, H
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 1994, 6 (01) : 15 - 22
[24] Effect of microwave-assisted curing process on strength development and curing duration of cellular lightweight geopolymer mortar
Suwan, Teewara
Paphawasit, Boontarika
Fan, Mizi
Jitsangiam, Peerapong
Chindaprasirt, Prinya
MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (09) : 1040 - 1048
[25] Effect of curing conditions and formulation on the adhesive strength of stone- siporex mortar composite
Ali, Harith E.
Brunetaud, Xavier
Beck, Kevin
Belayachi, Naima
Balawi, Malek
NEXO REVISTA CIENTIFICA, 2023, 36 (06): : 1006 - 1019
[26] Effect of water curing duration on strength behaviour of portland composite cement (PCC) mortar
Caronge, M. A.
Tjaronge, M. W.
Hamada, H.
Irmawaty, R.
GLOBAL CONGRESS ON CONSTRUCTION, MATERIAL AND STRUCTURAL ENGINEERING 2017 (GCOMSE2017), 2017, 271
[27] The curing times effect on the strength of ground granulated blast furnace slag (GGBFS) mortar
Yun, Chin Mei
Rahman, Md Rezaur
Phing, Cherlene Yong Wee
Chie, Anita Wong May
Bin Bakri, Muhammad Khusairy
CONSTRUCTION AND BUILDING MATERIALS, 2020, 260
[28] Effect of Microwave Curing on Mortar Properties
Topcu, Ilker Bekir
Toprak, M. Ugur
Kirmizi, Abdullah
TEKNIK DERGI, 2012, 23 (02): : 5951 - 5956
[29] Effect of Varying Curing Conditions on the Strength of Biopolymer Modified Sand
Lemboye, Kehinde
Almajed, Abdullah
POLYMERS, 2023, 15 (07)
[30] Effect of chemically reactive enamel coating on bonding strength at steel/mortar interface
Yan, Dongming
Reis, Signo
Tao, Xing
Chen, Genda
Brow, Richard K.
Koenigstein, Mike
CONSTRUCTION AND BUILDING MATERIALS, 2012, 28 (01) : 512 - 518

← 1 2 3 4 5 →