Influence of Overheating and Cooling Rate on the Structures and Properties of Alloys of the Fe–B System

被引：0
|
作者：
N. Yu. Filonenko
O. I. Babachenko
G. A. Kononenko
机构：
[1] Dnipro State Medical Academy,Nekrasov Institute of Ferrous Metallurgy
[2] Ukrainian National Academy of Sciences,undefined
来源：
Materials Science | 2019年 / 55卷
关键词：
alloys of Fe–B system; melt; overheating; structure; phase composition; mechanical and corrosion properties;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
It is shown that the overheating of a melt by 150°K over the liquidus curve and a cooling rate of 102−104 °K/sec favor the formation of a homogeneous finely divided eutectics in Fe–B alloys with boron contents of 2.0–4.5 wt.% and inhibit the appearance of primary crystals of iron in hypoeutectic alloys and Fe2B boride in hypereutectic alloys. It is established that, under these conditions, Fe3B iron boride is formed in the eutectics. This improves the mechanical and corrosion properties of these alloys.
引用
收藏
页码：440 / 446
页数：6
相关论文
共 50 条
  • [31] The effect of cooling rate on thermophysical properties of magnesium alloys
    Khan, M. N.
    Aljarrah, M.
    Wood, J. T.
    Medraj, M.
    JOURNAL OF MATERIALS RESEARCH, 2011, 26 (08) : 974 - 982
  • [32] The effect of cooling rate on thermophysical properties of magnesium alloys
    M. N. Khan
    M. Aljarrah
    J. T. Wood
    M. Medraj
    Journal of Materials Research, 2011, 26 : 974 - 982
  • [33] The effect of the cooling rate of dental alloys on their amalgamation properties
    Johnson, L.B.
    Carwile, A.C.
    1600, (12):
  • [34] γ-radiation influence on magnetic properties of amorphous alloys Fe-Si-B
    Maslov, VV
    Nosenko, VK
    Neimash, VB
    Povarchuk, VY
    METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2002, 24 (06): : 747 - 757
  • [35] The influence of cooling rate, chromium and silicon addition on the structure and properties of AlCoCrFeNiSi high entropy alloys
    Babilas, Rafal
    Lonski, Wojciech
    Borylo, Paulina
    Kadziolka-Gawel, Mariola
    Gebara, Piotr
    Radon, Adrian
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2020, 502
  • [36] Influence of melt overheating treatment on solidification behavior of BiTe-based alloys at different cooling rates
    Yu, Yuan
    Lv, Long
    Wang, Xiao-yu
    Zhu, Bin
    Huang, Zhong-yue
    Zu, Fang-qiu
    MATERIALS & DESIGN, 2015, 88 : 743 - 750
  • [37] Cooling rate controlled microstructure and magnetic properties of metastable Fe20Nd80 alloys
    Kumar, G
    Filip, O
    Löser, W
    Schultz, L
    Eckert, J
    INTERMETALLICS, 2006, 14 (01) : 47 - 53
  • [38] INFLUENCE OF THE Fe CONTENT, Mn/Fe RATIO AND COOLING RATE ON THE MODIFICATION PROCESS OF Fe INTERMETALLIC COMPOUNDS IN HYPOEUTECTIC Al-Si ALLOYS
    Zhang, Zhijun
    Kobayashi, Equo
    Tezuka, Hiroyasu
    Sato, Tatsuo
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13), 2012, : 1451 - 1456
  • [39] INFLUENCE OF COOLING CHARACTERISTICS ON GLASS-FORMATION OF FE-B AND NI-SI-B METALLIC ALLOYS
    SELLGER, R
    LOSER, W
    SCRIPTA METALLURGICA, 1988, 22 (04): : 483 - 488
  • [40] Effects of supercooling and cooling rate on the microstructure of Cu–Co–Fe alloys
    A. Munitz
    A. M. Bamberger
    S. Wannaparhun
    R. Abbaschian
    Journal of Materials Science, 2006, 41 : 2749 - 2759
12345