Investigation of the Effect of SiC-Whisker Content on the Properties of Ceramic Composite Material Obtained by Spark Plasma Sintering (SPS)

被引:0
|
作者
Yu. E. Lebedeva
G. M. Prokopchenko
A. N. Raevskikh
D. A. Zabelin
机构
[1] All-Russia Research Institute of Aviation Materials (VIAM),
来源
Glass and Ceramics | 2021年 / 78卷
关键词
spark plasma sintering; ceramic composite material; whiskers; silicon carbide; consolidation; crack resistance;
D O I
暂无
中图分类号
学科分类号
摘要
The effect of the content of silicon carbide whiskers and the sintering temperature on the physicomechanical and thermophysical properties of samples of a ceramic composite material (CCM) of the SiC–SiCw–B4C–AlN system with weight content of silicon carbide whiskers (SiCw) 10, 30, and 50%, obtained by spark plasma sintering. Introducing silicon carbide whiskers SiCw into CCM of the SiC–B4C–AlN system increased the bending strength and crack resistance, and at SiCw weight content 30 and 50% the strength and crack resistance of the CCM were at the same level.
引用
收藏
页码:284 / 287
页数:3
相关论文
共 50 条
  • [21] Effect of low content sintering aids addition on β-SiC sintered by spark plasma sintering
    Delobel, Florimond
    Cambedouzou, Julien
    Moitrier, Florence
    Lemonnier, Sebastien
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2022, 42 (06) : 2609 - 2617
  • [22] The fabrication and mechanical properties of SiC/ZrB2 laminated ceramic composite prepared by spark plasma sintering
    Wang, Hailong
    Fan, Bingbing
    Feng, Lun
    Chen, Deliang
    Lu, Hongxia
    Xu, Hongliang
    Wang, Chang-An
    Zhang, Rui
    CERAMICS INTERNATIONAL, 2012, 38 (06) : 5015 - 5022
  • [23] THE MICROSTRUCTURE AND SELECTED PROPERTIES OF TITANIUM HYDROXYAPATITE COMPOSITES OBTAINED BY SPARK PLASMA SINTERING (SPS METHOD)
    Dudek, Agata
    Klimas, Magdalena
    COMPOSITES THEORY AND PRACTICE, 2013, 13 (03): : 208 - 213
  • [24] Thermomechanical properties of a spark plasma sintered ZrC-SiC composite obtained by a precursor derived ceramic route
    Antou, G.
    Ohin, M. D.
    Lucas, R.
    Trolliard, G.
    Clegg, W. J.
    Foucaud, S.
    Maitre, A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 643 : 1 - 11
  • [25] Influence of microstructure and crystallographic phases on the tribological properties of SiC obtained by spark plasma sintering
    Gutierrez-Mora, F.
    Lara, A.
    Munoz, A.
    Dominguez-Rodriguez, A.
    Melandri, C.
    de Portu, G.
    WEAR, 2014, 309 (1-2) : 29 - 34
  • [26] The effect of alumina-based sintering aid on the microstructure, selected mechanical properties, and coefficient of friction of Cf/SiC composite prepared via spark plasma sintering (SPS) method
    Zahabi, Saeed
    Arjmand, Hesamodin
    Ramazani, Mazaher
    Al-Bahrani, Mohammed
    Naderi, Mehdi
    Tavoosi, Majid
    Gordani, Gholamreza
    Estarki, Mohammad Reza Loghman
    CERAMICS INTERNATIONAL, 2023, 49 (10) : 15253 - 15265
  • [27] Microstructure and Phase Composition of Porous SiC-Ceramic Obtained by Spark Plasma Sintering of Preceramic Paper
    E. P. Sedanova
    E. B. Kashkarov
    A. M. Lider
    Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques, 2023, 17 : S60 - S67
  • [28] Microstructure and Phase Composition of Porous SiC-Ceramic Obtained by Spark Plasma Sintering of Preceramic Paper
    Sedanova, E. P.
    Kashkarov, E. B.
    Lider, A. M.
    JOURNAL OF SURFACE INVESTIGATION, 2023, 17 (SUPPL 1): : S60 - S67
  • [29] Biomimetic apatite-based composite materials obtained by spark plasma sintering (SPS): physicochemical and mechanical characterizations
    Fabien Brouillet
    Danielle Laurencin
    David Grossin
    Christophe Drouet
    Claude Estournes
    Geoffroy Chevallier
    Christian Rey
    Journal of Materials Science: Materials in Medicine, 2015, 26
  • [30] Effect of TiB2 content on microstructure and mechanical properties of SiC composite ceramics by solid-state spark plasma sintering
    Liu, Jiangao
    Li, Yang
    Cheng, Changgui
    Li, Wei
    JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2024, 60 (03) : 971 - 978