Mechanism of Stretching and Breaking of Needle-Punched Nonwovens

被引：0
|
作者：
A. V. Dedov
B. A. Roev
V. I. Bobrov
G. B. Kulikov
V. G. Nazarov
机构：
[1] Moscow Polytechnic University,
来源：
Fibre Chemistry | 2018年 / 49卷
关键词：
Needle-punched Nonwovens; Fiber Packing; Additional Punch; Punching Mode; Material Plane;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The mechanism of stretching and breaking of structurally diverse needle-punched materials obtained under varying punching conditions was studied. It was found that stretching occurs in two stages because of uneven density of fibre packing in bundles and between bundles. The first stretching stage does not depend on the structure of the materials and punching conditions. The second stretching and breaking stage depends on the ratio of the strength of bonding between the fibres in the bundles and the fibre strength.
引用
收藏
页码：334 / 337
页数：3
相关论文
共 50 条
  • [21] Cyclic bursting loading on needle-punched nonwovens: Part I - Distention behavior
    Kumar, Bipin
    Das, Apurba
    Sharma, Atul
    Krishnasamy, Jagatheesan
    Alagirusamy, R.
    INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2018, 43 (01) : 20 - 24
  • [22] Modelling of tensile properties of needle-punched nonwovens using artificial neural networks
    Debnath, S
    Madhusoothanan, M
    Srinivasmoorthy, VR
    INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2000, 25 (01) : 31 - 36
  • [23] Modeling of thermal properties of multilayered fabrics by ANN consisting of polypropylene needle-punched nonwovens
    Shabaridharan, K.
    Das, A.
    JOURNAL OF THE TEXTILE INSTITUTE, 2014, 105 (02) : 109 - 118
  • [24] Surface and mechanical property measurements of H1 technology needle-punched nonwovens
    Roedel, C
    Ramkumar, SS
    TEXTILE RESEARCH JOURNAL, 2003, 73 (05) : 381 - 385
  • [25] Mechanical failure and strengthening mechanism of nanoporous phenolic composites reinforced with needle-punched fiber preforms of different needle-punched densities
    Cai, Hongxiang
    Jiang, Zhen
    Li, Liang
    Zhang, Xuanfeng
    Zhu, Xiaofei
    Tian, Hao
    Wang, Peng
    Cao, Yu
    Zhang, Yayun
    Niu, Bo
    Long, Donghui
    POLYMER COMPOSITES, 2025,
  • [26] Development and Mechanical Characterization of Needle-punched Kapok-Flax Nonwovens for Technical Uses
    Pividal, P.
    Rocha, A. M.
    JOURNAL OF NATURAL FIBERS, 2021, 18 (05) : 705 - 716
  • [27] An analysis on abrasion resistance of polyester-/viscose-blended needle-punched nonwovens
    Koc, Erdem
    Cincik, Emel
    JOURNAL OF THE TEXTILE INSTITUTE, 2013, 104 (08) : 852 - 860
  • [28] Needle-punched hybrid nonwovens of flax and PPFibers - Textile semiproducts for manufacturing of fiber composites
    Mieck, KP
    Lutzkendorf, R
    Reussmann, T
    POLYMER COMPOSITES, 1996, 17 (06) : 873 - 878
  • [29] The combined effect of carding and punching parameters on the structural, mechanical and functional properties of needle-punched nonwovens
    Roy, Rupayan
    Ishtiaque, S. M.
    Dixit, Priyal
    Laha, Animesh
    JOURNAL OF INDUSTRIAL TEXTILES, 2022, 52
  • [30] An investigation into the hydraulic properties of needle-punched nonwovens for application in wet-press concrete casting Part II: Predictive models for the water permeability of needle-punched nonwoven fabrics
    Lawrence, CA
    Shen, X
    JOURNAL OF THE TEXTILE INSTITUTE, 2000, 91 (01) : 61 - 77
12345