Modeling and compensation of geometric errors in simultaneous cutting using a multi-spindle machine tool

被引：0
|
作者：
Kyoung-Gee Ahn
Byung-Kwon Min
Zbigniew J. Pasek
机构：
[1] The University of Michigan,Engineering Research Center for Reconfigurable Manufacturing Systems
[2] Yonsei University,School of Mechanical Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2006年 / 29卷
关键词：
Compensation; Geometric error; Machine tool; Multi spindle; Simultaneous cutting ;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A volumetric error compensation method for a machining center that has multiple cutting tools operating simultaneously has been developed. Due to axis sharing, the geometric errors of multi-spindle, concurrent cutting processes are characterized by a significant coupling of error components in each cutting tool. As a result, it is not possible to achieve exact volumetric error compensation for all axes. To minimize the overall volumetric error in simultaneous cutting, a method to determine compensation amount using weighted least squares has been proposed. This method also allows tolerance distribution of machining accuracy for different surfaces of a workpiece. A geometric error model has been developed using an arch-type, multi-spindle machine tool, and the error compensation simulation results based on this model are presented. The simulation results demonstrated effectiveness of the proposed error compensation algorithm for use with multi-spindle simultaneous cutting applications.
引用
收藏
页码：929 / 939
页数：10
相关论文
共 50 条
  • [21] Modeling and compensation of cutting force induced error in NC machine tool
    Zuo, Jianmin
    Wang, Baosheng
    Wang, Mulan
    Yan, Hua
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS 2007, VOLS 1 AND 2, 2007, : 1622 - 1626
  • [22] Accuracy improvement of miniaturized machine tool: Geometric error modeling and compensation
    Lee, Jae Ha
    Liu, Yu
    Yang, Seung-Han
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (12-13): : 1508 - 1516
  • [23] Optimizing the cycle time of a multi-spindle pick-and-place machine
    Thiagarajan, Ashok
    Damodaran, Purushothaman
    Srihari, Krishnaswami
    IPACK 2007: PROCEEDINGS OF THE ASME INTERPACK CONFERENCE 2007, VOL 1, 2007, : 931 - 936
  • [24] Equivalent geometric errors of rotary axes and novel algorithm for geometric errors compensation in a nonorthogonal five-axis machine tool
    Kvrgic, Vladimir M.
    Ribic, Aleksandar, I
    Dimic, Zoran
    Zivanovic, Sasa T.
    Dodevska, Zorica A.
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2022, 37 : 477 - 488
  • [25] SMART SENSOR FOR ENHANCEMENT OF A MULTI-SPINDLE AUTOMATIC LATHE THERMAL ERROR COMPENSATION MODEL
    Horejs, O.
    Mares, M.
    Mlcoch, A.
    MM SCIENCE JOURNAL, 2021, 2021 : 4706 - 4712
  • [26] Optical Tool Breakage Monitoring for Multi-Spindle Boring Head Changers.
    Roehrer, R.
    Werkstatt und Betrieb, 1986, 119 (03): : 201 - 202
  • [27] BORING MACHINE WITH PNEUMATICALLY SUPPORTED MULTI-SPINDLE HEAD IN COOPERATION WITH DRILLING ENGINE
    SOBOCKI, B
    JURDZIAK, R
    MECHANIK MIESIECZNIK NAUKOWO-TECHNICZNY, 1977, 50 (12): : 663 - 664
  • [28] MODELING AND COMPENSATION TECHNIQUE FOR THE GEOMETRIC ERRORS OF FIVE-AXIS CNC MACHINE TOOLS
    Wang ShuxinYun JintianZhang ZhifeiLiu YouwuZhang QingSchool of Mechanical Engineering
    Chinese Journal of Mechanical Engineering, 2003, (02) : 197 - 201
  • [29] Measuring the geometric errors of a hexapod machine tool
    Soons, JA
    LASER METROLOGY AND MACHINE PERFORMANCE IV, 1999, : 169 - 182
  • [30] On the geometric and thermal errors of a hexapod machine tool
    Soons, JA
    PARALLEL KINEMATIC MACHINES: THEORETICAL ASPECTS AND INDUSTRIAL REQUIREMENTS, 1999, : 151 - 169
12345