Parametric study on the performance of solar air heater equipped with louvered fins

被引:0
|
作者
Subhash Chand
Prabha Chand
机构
[1] National Institute of Technology,Department of Mechanical Engineering
关键词
Solar air heater; Louvered fin; Thermal efficiency; Thermohydraulic efficiency;
D O I
暂无
中图分类号
学科分类号
摘要
A theoretical model is developed in this study to investigate the performance of solar air collector equipped with louvered fins. Parameters, such as mass flow rate, fin spacing, louvered pitch ratio (w/Lp), and louvered angle, are considered. The governing equations are solved using a computer code that employs an iterative solution procedure, and the obtained results are compared with that using plain solar air heater. The thermal efficiency of the plain solar air heater is enhanced from 43.14 % to 76.79 % by employing louvered fins with fin spacing values of 5 and 1 cm at a constant mass flow rate of 0.020 kg/s. However, the pressure drop effect becomes dominant that decreases the effective efficiency by 9.4 % at a high mass flow rate of 0.083 kg/s.
引用
收藏
页码:3965 / 3973
页数:8
相关论文
共 50 条
  • [41] Experimental study of heat transfer characteristics of an impinging jet solar air heater with fins
    Goel, Abhishek Kumar
    Singh, S. N.
    ENVIRONMENT DEVELOPMENT AND SUSTAINABILITY, 2020, 22 (04) : 3641 - 3653
  • [42] Examination of the Solar Air Heater Operating Parameters Equipped with the Swirlers
    Zukowski, Miroslaw
    Woroniak, Grzegorz
    Perkowski, Andrzej
    RENEWABLE ENERGY SOURCES: ENGINEERING, TECHNOLOGY, INNOVATION, 2018, : 177 - 189
  • [43] Augmenting the Thermal Performance of Solar Air Heater with Absorber Plate Roughened with Pin-Fins
    Khelkar, Ashish B.
    Syrti, Kynjrilang
    Das, Rajat Subhra
    Sarkar, Bikash Kumar
    2022 7TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, ICMERR, 2022, : 179 - 185
  • [44] Parametric study of a solar air heater with and without thermal storage for solar drying applications
    Aboul-Enein, S
    El-Sebaii, AA
    Ramadan, MRI
    El-Gohary, HG
    RENEWABLE ENERGY, 2000, 21 (3-4) : 505 - 522
  • [45] Performance augmentation of a solar air heater using herringbone metal foam fins: An experimental work
    Taha, Safa Y.
    Farhan, Ammar A.
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2021, 45 (02) : 2321 - 2333
  • [46] Effective thermal performance assessment for prismatic triangular solar air heater integrated with fins and turbulators
    Stalin, P. Michael Joseph
    Rao, Putta Nageswara
    Palaniappan, Murugesan
    Kumar, P. Manoj
    Udhayakumar, K.
    NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2024,
  • [47] Design and performance analysis of a new evacuated tube solar air heaters equipped with fins and coils
    Abu Hamed, Tareq
    Alkharabsheh, Salem
    INTERNATIONAL JOURNAL OF SUSTAINABLE ENERGY, 2020, 39 (10) : 997 - 1008
  • [48] Performance Analysis and Parametric Study of a Natural Convection Solar Air Heater With In-built Oil Storage
    Dhote Y.
    Thombre S.
    Journal of The Institution of Engineers (India): Series C, 2016, 97 (4) : 527 - 537
  • [49] Analysis of a solar air heater for augmented thermohydraulic performance using helicoidal spring shaped fins-A numerical study
    Arunkumar, H. S.
    Kumar, Shiva
    Karanth, K. Vasudeva
    RENEWABLE ENERGY, 2020, 160 : 297 - 311
  • [50] Numerical evaluation of the thermal performance of a solar air heater equipped with two different types of baffles
    Olfian, Hassan
    Sheshpoli, Amirhossein Zabihi
    Ajarostaghi, Seyed Soheil Mousavi
    HEAT TRANSFER, 2020, 49 (03) : 1149 - 1169