Analysis of oil-lubricated herringbone grooved journal bearing with trapezoidal cross-section, using a spectral finite difference method

被引：0
|
作者：
Jun Liu
Mochimaru Yoshihiro
机构：
[1] Keihin-Corp,Tochigi R&D Center
[2] Tokyo Institute of Technology,Department of International Development Engineering, Graduate School of Science and Engineering
来源：
Journal of Hydrodynamics | 2010年 / 22卷
关键词：
fluid lubrication; modified Reynolds equation; curvature effect; herringbone grooves; trapezoid groove; journal bearing;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A modified Reynolds equation for an oil-lubricated journal bearing is derived, including curvature effect under a lubrication theory, and the curvature effect on characteristics of the journal bearing is discussed. In addition, in case of a herringbone-grooved journal bearing with trapezoidal cross-sections, the modified Reynolds equation is solved, using a spectral finite difference method to get characteristics such as variation of load capacity and attitude angle for trapezoidal angles of from 1.8 through 7.2 degrees.
引用
收藏
页码：397 / 401
页数：4
相关论文
共 50 条
  • [21] Numerical analysis on the performance characteristics of a new gas journal bearing by using finite difference method
    Li, Yuntang
    Li, Ruirui
    Ye, Yueliang
    Li, Xiaolu
    Chen, Yuan
    ADVANCES IN MECHANICAL ENGINEERING, 2021, 13 (06)
  • [22] A New Singularity Treatment Approach for Journal-Bearing Mixed Lubrication Modeled by the Finite Difference Method With a Herringbone Mesh
    Han, Yanfeng
    Xiong, Shangwu
    Wang, Jiaxu
    Wang, Q. Jane
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2016, 138 (01):
  • [23] Analysis of composite laminate beams using coupling cross-section finite element method
    Wen-guang Jiang
    John L. Henshall
    Applied Mathematics and Mechanics, 2006, 27 : 1709 - 1718
  • [24] Finite element analysis of gas-lubricated grooved journal bearings (1st report, analysis method)
    Kinouchi, Kazuhiro
    Tanaka, Katsuhiko
    Yoshimura, Shinobu
    Yagawa, Genki
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1994, 60 (574): : 2116 - 2121
  • [25] ANALYSIS OF COMPOSITE LAMINATE BEAMS USING COUPLING CROSS-SECTION FINITE ELEMENT METHOD
    姜文光
    John L．Henshall
    AppliedMathematicsandMechanics(EnglishEdition), 2006, (12) : 1709 - 1718
  • [26] Numerical analysis of Journal Bearing based on Finite Difference Method with Inhomogeneous Grid
    Fu, Yiyang
    Jin, Jian
    Chen, Xiaochao
    2018 2ND INTERNATIONAL CONFERENCE ON FLUID MECHANICS AND INDUSTRIAL APPLICATIONS, 2018, 1064
  • [27] The Volume Measurement of Air Flowing through a Cross-section with PLC Using Trapezoidal Rule Method
    Calik, Huseyin
    JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, 2013, 8 (04) : 872 - 878
  • [28] ANALYSIS OF ARBITRARY CROSS-SECTION MICROSTRIP USING THE METHOD OF LINES
    HE, YJ
    LI, SF
    IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 1994, 42 (01) : 162 - 164
  • [29] Shape sensing of variable cross-section beam using the inverse finite element method and isogeometric analysis
    Zhao, Feifei
    Xu, Libo
    Bao, Hong
    Du, Jingli
    MEASUREMENT, 2020, 158
  • [30] Quasi-TEM Analysis of a Shielded Microstrip Line of Elliptic Cross-Section with Finite Metallization Thickness Penetrating into the Substrate by the Finite Difference Method
    Qiang Wang
    Changqing Liu
    Ying Li
    International Journal of Infrared and Millimeter Waves, 2000, 21 : 91 - 100
12345