In-service repair of main pipelines by welding

被引：0
|
作者：
V. I. Makhnenko
V. S. But
O. I. Oleinik
机构：
[1] National Academy of Sciences of ukraine,Paton Institute of Electric Welding
来源：
Strength of Materials | 2009年 / 41卷
关键词：
pipeline; welding; repair; strength; serviceability;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A new approach to the repair of main pipelines by welding without removing them from service is proposed. The approach is based on four points: ranking of defects by the degree of failure risk; safety of welding works on pipeline under pressure; use of different variants of repair by welding; serviceability evaluation of welded repair constructions. The use of this approach makes it possible to minimize pipeline failure risk and to predict pipeline serviceability after repair by welding.
引用
收藏
页码：516 / 526
页数：10
相关论文
共 50 条
  • [21] LOWERING IN-SERVICE PIPELINES.
    Kiefner, J.F.
    Wall, T.A.
    Pipeline and Gas Journal, 1985, 212 (11): : 45 - 47
  • [22] DESIGN OF IN-SERVICE REPAIR WELDING PROCEDURES FOR OPERATING PIPELINES: CRITICAL ASSESSMENT OF VARIABLES AFFECTING RESTRAINT LEVEL AND HEAT-AFFECTED ZONE MICROSTRUCTURES OF VINTAGE PIPELINES
    Guest, Stuart
    Dyck, Jason
    Egbewande, Afolabi
    MacKenzie, Robert
    Sadowski, Mark
    PROCEEDINGS OF THE 11TH INTERNATIONAL PIPELINE CONFERENCE, 2016, VOL 3, 2017,
  • [23] In-Service Weld Repair Methods for Gas Transmission Pipelines under Public Roads
    Tanaka, T.
    Yano, T. Y.
    Katsuki, M.
    Mayumi, T.
    Otani, Y.
    Oguchi, N.
    PIPELINES 2017: CONSTRUCTION AND REHABILITATION, 2017, : 186 - 197
  • [24] Evaluation of Burnthrough in the MIG/MAG In-Service Welding of High Strength and Low Thickness Pipelines
    Pereira, Aldo S.
    Buschinelli, Augusto J. A.
    Kejelin, Norton Z.
    SOLDAGEM & INSPECAO, 2013, 18 (03): : 235 - 244
  • [25] Weld cooling-rates &the onset of failure during "in-service" welding of gas pipelines
    Wahab, M. A.
    Sabapathy, P. N.
    Painter, M. J.
    Recent Advances in Solids and Structures - 2005, 2005, 493 : 133 - 139
  • [26] Study on the Failure Mechanism of Burn-Through During In-Service Welding on Gas Pipelines
    Wu Qian
    Wang Yong
    Han Tao
    Wang Hongtao
    Gu Shiwei
    Han Laihui
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2019, 141 (02):
  • [27] THE EFFECT OF HOOP STRESS ON THE BURNTHROUGH SUSECPTIBILITY DURING IN-SERVICE WELDING OF THIN-WALLED PIPELINES
    Boring, Matthew A.
    Bruce, William A.
    IPC2008: PROCEEDINGS OF THE ASME INTERNATIONAL PIPELINE CONFERENCE - 2008, VOL 3, 2009, : 261 - 266
  • [28] Numerical study of fillet weld leg height of sleeve repair welding for in-service pipeline
    乔羚
    韩涛
    张洪杰
    吴倩
    鲍亮亮
    China Welding, 2018, 27 (01) : 32 - 40
  • [29] Assessing the influence of soil loading and restraint on in-service pipelines
    Leach, G
    Young, AT
    AGEING PIPELINES: OPTIMIZING THE MANAGEMENT AND OPERATION: LOW-PRESSURE - HIGH-PRESSURE, 1999, 1999 (08): : 49 - 68
  • [30] Assessment on remaining strength of spiral welds of in-service pipelines
    Feng, Qingshan
    Gao, Kewei
    Zhou, Lijian
    Cui, Hongsheng
    Wang, Weibin
    Han, Xiaoming
    Li, Yi
    Tan, Xianjun
    He, Mao
    ENGINEERING STRUCTURAL INTEGRITY: RESEARCH, DEVELOPMENT AND APPLICATION, VOLS 1 AND 2, 2007, : 1457 - +
12345