A constitutive model for polyurethane foam with strain rate sensitivity

被引：1
|
作者：
Kwang Young Jeong
Seong Sik Cheon
Mahbubul Basit Munshi
机构：
[1] Kongju National University,Division of Mechanical and Automotive Engineering
[2] Auburn University,Department of Mechanical Engineering
来源：
Journal of Mechanical Science and Technology | 2012年 / 26卷
关键词：
Polyurethane foam; Constitutive model; Dynamic loading; Strain rate;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The present work investigates the strain rate dependent behavior of polyurethane foams and formulates a new constitutive model in order to improve the fit of the experimental data at various strain rates. The model has seven parameters that are decided by quasi-static compression tests at two strain rates. Two models for low and high density polyurethane foams are shown to give stress strain relation at various strain rates. Dynamic compression tests were carried out to give stress strain data at high strain rate and the results are compared with those of the constitutive model.
引用
收藏
页码：2033 / 2038
页数：5
相关论文
共 50 条
  • [31] High-strain-rate compressive behavior of a rigid polyurethane foam with various densities
    W. Chen
    F. Lu
    N. Winfree
    Experimental Mechanics, 2002, 42 (1) : 65 - 73
  • [32] High-strain-rate compressive behavior of a rigid polyurethane foam with various densities
    Chen, W
    Lu, F
    Winfree, N
    EXPERIMENTAL MECHANICS, 2002, 42 (01) : 65 - 73
  • [33] A Novel High Strain Rate Sensitive Rigid Polyurethane Resin Based Syntactic Foam
    Yazici, M.
    ACTA PHYSICA POLONICA A, 2016, 129 (04) : 613 - 616
  • [34] Construction of Constitutive Model and Strain-Rate Sensitivity Coefficient Distribution Map of Ti2AlNb
    Zhang, Yongqiang
    Xue, Xiangyi
    Zhang, Jingli
    Xin, Shewei
    Pan, Hao
    Sun, Huamei
    Li, Huiming
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (07) : 1988 - 1996
  • [35] Construction of Constitutive Model and Strain-Rate Sensitivity Coefficient Distribution Map of Ti2AlNb
    Yongqiang Zhang
    Xiangyi Xue
    Jingli Zhang
    Shewei Xin
    Hao Pan
    Huamei Sun
    Huiming Li
    Metals and Materials International, 2021, 27 : 1988 - 1996
  • [36] Strain rate jump induced negative strain rate sensitivity (NSRS) in aluminum alloy 2024: Experiments and constitutive modeling
    Gupta, Satyapriya
    Beaudoin, Armand Joseph, Jr.
    Chevy, Juliette
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 683 : 143 - 152
  • [37] Constitutive model for high strain rate response of polymeric composites
    Tsai, J
    Sun, CT
    COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (10-11) : 1289 - 1297
  • [38] A strain rate dependent constitutive model for clays at residual strength
    Wedage, AMP
    Morgenstern, NR
    Chan, DH
    CANADIAN GEOTECHNICAL JOURNAL, 1998, 35 (02) : 364 - 373
  • [39] A CONSTITUTIVE MODEL FOR METALS APPLICABLE AT HIGH-STRAIN RATE
    STEINBERG, DJ
    COCHRAN, SG
    GUINAN, MW
    JOURNAL OF APPLIED PHYSICS, 1980, 51 (03) : 1498 - 1504
  • [40] Constitutive Equations of Yield Stress Sensitivity to Strain Rate of Metals: A Comparative Study
    Al Salahi, Ammar A.
    Othman, Ramzi
    JOURNAL OF ENGINEERING, 2016, 2016
12345