Structure and mechanical properties of iron subjected to surface severe plastic deformation by attrition: II. Mechanical properties of nano- and submicrocrystalline iron

被引：8
|
作者：
Yurkova A.I. [1 ,2 ]
Milman Y.V. [2 ]
Byakova A.V. [1 ,2 ]
机构：
[1] Kiev Polytechnical Institute, National Technical University of Ukraine, Kiev 03056
[2] Institute of Problems of Materials Science, National Academy of Sciences of Ukraine
来源：
Russian Metallurgy (Metally) | 2010年 / 2010卷 / 4期
关键词：
Severe Plastic Deformation; RUSSIAN Metallurgy; Triple Junction; Grain Boundary Slide; Armco Iron;
D O I：
10.1134/S0036029510040026
中图分类号：
学科分类号：
摘要：
Depth-sensing indentation is used to study the effect of grain refinement to submicro- and nanograins on the mechanical properties (hardness, plasticity, Young's modulus) of armco iron subjected to severe plastic deformation by attrition in argon. In contrast to fcc metals, where the hardness increases and the plasticity decreases as the grain size decreases to 20 nm, the hardness of bcc iron decreases from 5.8 to 3.7 GPa and plasticity δA increases from 0.82 to 0.87 as the grain size decreases from 50 to 20 nm. © 2010 Pleiades Publishing, Ltd.
引用
收藏
页码：258 / 263
页数：5
相关论文
共 50 条
  • [31] Microstructure and mechanical properties of medium-carbon steel subjected to severe plastic deformation
    M. V. Karavaeva
    S. K. Nurieva
    N. G. Zaripov
    A. V. Ganeev
    R. Z. Valiev
    Metal Science and Heat Treatment, 2012, 54 : 155 - 159
  • [32] Mechanical properties, ductility, and grain size of nanocrystalline iron produced by mechanical attrition
    North Carolina State Univ, Raleigh, United States
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1998, 29 A (09): : 2285 - 2295
  • [33] Mechanical properties, ductility, and grain size of nanocrystalline iron produced by mechanical attrition
    Malow, TR
    Koch, CC
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1998, 29 (09): : 2285 - 2295
  • [34] Mechanical properties, ductility, and grain size of nanocrystalline iron produced by mechanical attrition
    T. R. Malow
    C. C. Koch
    Metallurgical and Materials Transactions A, 1998, 29 : 2285 - 2295
  • [35] Structure and Properties of Grain Boundaries in Submicrocrystalline W Obtained By Severe Plastic Deformation
    Popov, V. V.
    Valiev, R. Z.
    Popova, E. N.
    Sergeev, A. V.
    Stolbovsky, A. V.
    Kazihanov, V. U.
    DIFFUSION IN SOLIDS AND LIQUIDS IV, 2009, 283-286 : 629 - +
  • [36] Structure and Mechanical Properties of a High-Carbon Steel Subjected to Severe Deformation
    Gorkunov, E. S.
    Zadvorkin, S. M.
    Goruleva, L. S.
    Makarov, A. V.
    Pecherkina, N. L.
    PHYSICS OF METALS AND METALLOGRAPHY, 2017, 118 (10): : 1006 - 1014
  • [37] Structure and mechanical properties of an aluminum alloy 1570 subjected to severe plastic deformation by high-pressure torsion
    M. Yu. Murashkin
    A. R. Kil’mametov
    R. Z. Valiev
    The Physics of Metals and Metallography, 2008, 106
  • [38] Structure and mechanical properties of an aluminum alloy 1570 subjected to severe plastic deformation by high-pressure torsion
    Murashkin, M. Yu.
    Kil'mametov, A. R.
    Valiev, R. Z.
    PHYSICS OF METALS AND METALLOGRAPHY, 2008, 106 (01): : 90 - 96
  • [39] The Structure and Mechanical Properties of an Al-1.8Mn-1.6Cu Alloy Subjected to Severe Plastic Deformation
    Petrova, A. N.
    Astafiev, V. V.
    Kuryshev, A. O.
    PHYSICS OF METALS AND METALLOGRAPHY, 2024, 125 (12): : 1451 - 1456
  • [40] MECHANICAL PROPERTIES OF ALUMINUM PROCESSED BY SEVERE PLASTIC DEFORMATION
    Comanici, Adrian
    Comaneci, Radu
    MODTECH 2011: NEW FACE OF T.M.C.R., VOL I AND II, 2011, : 281 - 284
12345