Wear Resistance of Detonation Coatings with Amorphous Structure Under Conditions of Friction Against Nonrigidly Fixed Abrasive Particles

被引：0
|
作者：
I. D. Kuchumova
V. A. Bataev
B. E. Grinberg
I. S. Batraev
A. M. Jorge
机构：
[1] Novosibirsk State Technical University,Department of Materials Science and Engineering
[2] Lavrent’ev Institute of Hydrodynamics of the Siberian Branch of the Russian Academy of Sciences,undefined
[3] Construction-Technology Branch of the Lavrent’ev Institute of Hydrodynamics of the Siberian Branch of the Russian Academy of Sciences,undefined
[4] Federal University of Saö Carlos,undefined
[5] University of Grenoble Alpes,undefined
[6] University Savoie Mont Blanc,undefined
[7] CNRS,undefined
[8] Grenoble INP,undefined
[9] LEMPI,undefined
[10] Grenoble Alpes University,undefined
[11] CNRS,undefined
[12] LEPMI and SIMAP,undefined
来源：
Metal Science and Heat Treatment | 2022年 / 63卷
关键词：
knock (detonation) spraying; amorphous structure; coating; wear resistance; friction;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The possibility of forming coatings with a high content of amorphous phase by knock (detonation) spraying of a powder of alloy Fe66Cr10Nb5B19 of fraction 45 – 75 μm is considered. Results of comparative tests of the coatings and of a stainless steel check test piece for abrasive wear under friction against nonrigidly fixed abrasive particles conducted according to ASTM G65D are presented. The wear mechanisms of the knock-sprayed coatings with partially crystallized structure are studied.
引用
收藏
页码：463 / 469
页数：6
相关论文
共 50 条
  • [31] A study on friction and wear properties of PTFE coatings under vacuum conditions
    Yuan, Xing-Dong
    Yang, Xiao-Jie
    WEAR, 2010, 269 (3-4) : 291 - 297
  • [32] Formation of friction layers and wear resistance of steels under conditions of boundary friction
    Novitskii, VG
    Gavrilyuk, VP
    Panasenko, DD
    Kal'chuk, NA
    Khoruzhii, VY
    MATERIALS SCIENCE, 2003, 39 (06) : 855 - 862
  • [33] Formation of Friction Layers and Wear Resistance of Steels under Conditions of Boundary Friction
    V. G. Novitskii
    V. P. Gavrilyuk
    D. D. Panasenko
    N. A. Kal'chuk
    V. Ya. Khoruzhii
    Materials Science, 2003, 39 : 855 - 862
  • [34] Study of Abrasive Wear Resistance of Detonation Coatings Made of Mechanically Alloyed Powders Ti-Al-B
    Sirovatka, V. L.
    JOURNAL OF FRICTION AND WEAR, 2011, 32 (02) : 91 - 94
  • [35] Study of abrasive wear resistance of detonation coatings made of mechanically alloyed powders Ti-Al-B
    V. L. Sirovatka
    Journal of Friction and Wear, 2011, 32 : 91 - 94
  • [36] Friction and wear behavior under oil lubrication conditions of amorphous-nanocrystalline composite coatings deposited via HVAS
    Xin, Wei
    Wang, YuJiang
    Wei, ShiCheng
    Liang, Yi
    Xia, XingChuan
    Chen, Xi
    Wang, Bo
    Xu, BinShi
    SURFACE & COATINGS TECHNOLOGY, 2022, 429
  • [37] Wear Resistance of Electrospark-Deposited Coatings in Dry Sliding Friction Conditions
    V.M. Holubets
    M.I. Pashechko
    J. Borc
    O.V. Tisov
    Yu.S. Shpuliar
    Powder Metallurgy and Metal Ceramics, 2021, 60 : 90 - 96
  • [38] Gas-thermal coatings wear resistance working at conditions of lubricating friction
    Bykov, V.I.
    Yurchenko, Yu.D.
    Kulikov, A.S.
    Gubar', E.Ya.
    Mironenko, V.V.
    Trenie i Iznos, 1992, 13 (03): : 538 - 541
  • [39] Wear Resistance of Electrospark-Deposited Coatings in Dry Sliding Friction Conditions
    Holubets, V. M.
    Pashechko, M., I
    Borc, J.
    Tisov, O., V
    Shpuliar, Yu S.
    POWDER METALLURGY AND METAL CERAMICS, 2021, 60 (1-2) : 90 - 96
  • [40] WEAR-RESISTANCE OF STEELS UNDER WET-ABRASIVE EROSION CONDITIONS
    WANG, QL
    WEAR, 1986, 112 (02) : 207 - 216
12345