Effects of SrO–B2O3–SiO2 glass additive on dielectric properties of Ba(Fe0.5Nb0.5)O3 ceramics

被引:0
|
作者
Zhuo Wang
Hai Juan Li
Liang Liang Zhang
Yong Ping Pu
机构
[1] Shaanxi University of Science & Technology, Key Laboratory of Auxiliary Chemistry and Technology for Chemical Industry, School of Materials Science and Engineering
关键词
Dielectric Constant; Dielectric Property; Dielectric Loss; B2O3; Breakdown Strength;
D O I
暂无
中图分类号
学科分类号
摘要
SrO–B2O3–SiO2 (SBS) glass powders were prepared and employed as sintering aids to reduce the sintering temperature of Ba(Fe0.5Nb0.5)O3 (BFN) ceramics. The effects of glass content on the dielectric properties and breakdown strength of BFN ceramics have been investigated. The volume density characterization results of (1 − x) BFN − x SBS ceramics indicate that the sintering temperature of BFN ceramics decreased by 200–350 °C with SBS glass addition (when x = 0, 0.01, 0.03 and 0.05). The XRD patterns show BFN ceramics indicate cubic crystal structure and without the formation of a secondary phase. The dielectric constant and dielectric loss decreased gradually with increasing glass content, and the dielectric loss decreased by one order of magnitude with SBS glass addition (when x = 0.05). The breakdown strength of (1 − x) BFN − x SBS ceramics increase with increasing glass content, in which is about 33.90 kV/cm with SBS glass addition (when x = 0.05). These improvements in the dielectric characteristics of BFN ceramics have great scientific significance for their applications.
引用
收藏
页码:3418 / 3422
页数:4
相关论文
共 50 条
  • [21] Dielectric properties and defect mechanisms of (1-x)Ba(Fe0.5Nb0.5)O3 -xBiYbO3 ceramics
    Saisai Liu
    Xiaojun Sun
    Biaolin Peng
    Hongbo Su
    Zaoming Mei
    Yanmin Huang
    Jianming Deng
    Congxue Su
    Liang Fang
    Laijun Liu
    Journal of Electroceramics, 2016, 37 : 137 - 144
  • [22] Influence of Processing Temperature on Properties of Sr(Fe0.5Nb0.5)O3 High Dielectric Ceramics
    Kruea-In, Chatchai
    Udsah, Watcharapong
    Eitssayeam, Sukum
    Pengpat, Kamonpan
    Rujijanagul, Gobwute
    FERROELECTRICS, 2013, 456 (01) : 128 - 133
  • [23] Effect of Sintering Atmosphere on Microstructure and Dielectric Properties of Sr(Fe0.5Nb0.5)O3 Ceramics
    Wang, Zhuo
    Wang, Chun
    Wen, Yongfei
    Zhang, Liangliang
    FERROELECTRICS, 2016, 492 (01) : 126 - 133
  • [24] Effect of MnO2 addition on structure, electrical and optical properties of Ba(Fe0.5Nb0.5)O3 ceramics
    Kumar, Subrat
    Chandrasekhar, Mallam
    Rao, Tangi Lakshmana
    Harshavardhan, Vanga
    Kumar, Pawan
    PROCESSING AND APPLICATION OF CERAMICS, 2024, 18 (03) : 323 - 329
  • [25] Preparation and properties of Al2O3-modified Ba(Fe0.5Nb0.5)O3composite ceramics
    Wang, Chun
    Wang, Zhuo
    Wen, Yong-Fei
    Li, Hai-Juan
    Fang, Ming-Rui
    Rengong Jingti Xuebao/Journal of Synthetic Crystals, 2015, 44 (11): : 3250 - 3254
  • [26] Electric and mechanical properties of Pb(Fe0.5Nb0.5)O3 ferroelectric ceramics
    Zachariasz, Radoslaw
    Ilczuk, Jan
    ARCHIVES OF ACOUSTICS, 2007, 32 (04) : 111 - 116
  • [27] MICROSTRUCTURE AND PROPERTIES OF LEAD FERRONIOBATE CERAMICS (PB(FE0.5NB0.5)O3)
    CHIU, CC
    DESU, SB
    MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 1993, 21 (01): : 26 - 35
  • [28] Microstructures and energy storage properties of Sr0.5Ba0.5Nb2O6 ceramics with SrO-B2O3-SiO2 glass addition
    Chen, Xi
    Tang, Yu
    Bo, Xiangkun
    Song, Jun
    Luo, Jinzhi
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2018, 29 (20) : 17563 - 17570
  • [29] Effect of Nd3+ on the microwave dielectric properties of (Pb0.5Ca0.5)(Fe0.5Nb0.5)O3 ceramics
    Yang, QH
    Kim, ES
    Xu, J
    MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2004, 113 (03): : 224 - 227
  • [30] Preparation and dielectric properties of Sr(Fe0.5Nb0.5)O3 by coprecipitation method
    Zhuo Wang
    Yong Fei Wen
    Hai Juan Li
    Ming Rui Fang
    Chun Wang
    Yong Ping Pu
    Journal of Materials Science: Materials in Electronics, 2015, 26 : 769 - 773