Calculation of the molten pool depth in vacuum arc remelting of alloy Vt3-1

被引：39

作者：

Kondrashov E.N. ^{[1
]}

Musatov M.I. ^{[2
]}

Maksimov A.Yu. ^{[1
]}

Goncharov A.E. ^{[1
]}

Konovalov L.V. ^{[1
]}

机构：

[1] VSMPO-AVISMA Corp., Verkhnyaya Salda 624760

[2] VILS Corp., Moscow 121596

来源：

Journal of Engineering Thermophysics | 2007年 / 16卷 / 1期

关键词：

Titanium Alloy; Current Intensity; Molten Pool; Engineer THERMOPHYSICS; Pool Surface;

D O I：

10.1134/S1810232807010031

中图分类号：

学科分类号：

摘要：

This paper is devoted to a simple heat model of vacuum arc remelting (VAR) including the solution of a nonlinear heat conduction equation with nonlinear boundary conditions typical for VAR. A finite-difference analog of the model's initial equation is obtained by the finite-volume method. The system obtained is solved by a two-cyclic scheme of component-wise splitting. A simplified model neglecting the magnetohydrodynamic phenomena in the molten pool is tested by comparison of the results of numerical calculations of the pool depth in remelting of the Russian titanium alloy Vt3-1 (Ti-6.5Al-2.5Mo-1.5Cr-0.5Fe-0.3Si) with the results of radiographic experiments. It has been shown that the model fits the experimental data well under various remelting conditions (the ingot diameter and operating current intensity). © Pleiades Publishing, Ltd. 2007.

引用

页码：19 / 25

页数：6

共 50 条

[21] Effect of electropulse treatment on the structure of the surface layer of alloy VT3-1
S. V. Loskutov
Metal Science and Heat Treatment, 2006, 48 : 261 - 263
[22] EFFECT OF ROLLING CONDITIONS ON THE FRACTURE-TOUGHNESS OF ALLOY VT3-1
IVANOV, AS
TOMSINSKII, VS
SHISHKINA, MI
METAL SCIENCE AND HEAT TREATMENT, 1980, 22 (1-2) : 67 - 69
[23] Effect of electropulse treatment on the structure of the surface layer of alloy VT3-1
Loskutov, S. V.
METAL SCIENCE AND HEAT TREATMENT, 2006, 48 (5-6) : 261 - 263
[24] EFFECT OF STRUCTURE ON THE TYPE OF FRACTURE OF TITANIUM-ALLOY VT3-1
PERTSOVSKII, NZ
BRUN, MY
SEMENOVA, NM
METAL SCIENCE AND HEAT TREATMENT, 1982, 24 (11-1) : 853 - 859
[25] Nitriding of VT3-1 titanium alloy in a glow discharge with hollow cathode
Budilov, V. V.
Ramazanov, K. N.
Zolotov, I. V.
Khusainov, Yu. G.
Vardanyan, E. L.
5TH INTERNATIONAL CONGRESS ON ENERGY FLUXES AND RADIATION EFFECTS 2016, 2017, 830
[26] Modeling of vacuum arc remelting of Alloy 718 ingots
Patel, AD
Minisandram, RS
Evans, DG
SUPERALLOYS 2004, 2004, : 917 - 924
[27] MECHANICAL-PROPERTIES AND LOW-TEMPERATURE CREEP OF ALLOY VT3-1
ARKOVENKO, GI
GREKOV, NA
SOLONINA, OP
METAL SCIENCE AND HEAT TREATMENT, 1976, 18 (3-4) : 273 - 275
[28] EFFECT OF GLOBULAR STRUCTURE PARAMETERS ON THE MECHANICAL-PROPERTIES OF ALLOY VT3-1
BRUN, MY
SHAKHANOVA, GV
RODIONOV, VL
SOLDATENKO, IV
METAL SCIENCE AND HEAT TREATMENT, 1984, 26 (5-6) : 377 - 380
[29] CYCLIC PLASTIC REACTION OF VT3-1 TITANIUM-ALLOY AT INCREASED TEMPERATURES
PUSKAR, A
LETKO, I
KOVOVE MATERIALY-METALLIC MATERIALS, 1989, 27 (02): : 143 - 151
[30] HEAT-TREATMENT OF LARGE FORGINGS OF TITANIUM-ALLOY VT3-1
ARKOVENKO, GI
GREKOV, NA
SAZONOVA, TN
METAL SCIENCE AND HEAT TREATMENT, 1977, 19 (5-6) : 491 - 493

← 1 2 3 4 5 →