Investigations of the Mechanical and Microstructural Effects of Pinless Tool Geometry on Friction Stir Spot Welding Process

被引：0
|
作者：
Hande Güler Özgül
Orhan Dedeoğlu
机构：
[1] Uludag University,Department of Automotive Engineering, Faculty of Engineering
[2] Uludag University,Department of Automotive Engineering, Graduate School of Natural and Applied Sciences
来源：
Transactions of the Indian Institute of Metals | 2020年 / 73卷
关键词：
Friction stir spot welding; Aluminum alloys; Hardness; Shear force;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study, mechanical properties, macrostructure and microstructure of the friction stir spot weld joints were investigated under the influence of pinless tool geometry and different rotation speed parameters (1350, 1850 and 2530 rpm) using Al5754 plates. Tensile shear strength tests were carried out for joints of different process parameters, and fracture surfaces were inspected by scanning electron microscopy; in addition, fracture modes of the joints were also evaluated. According to the results, the maximum strength values were obtained at 1850 rpm rotation speed, and ductile and brittle fractures were observed together.
引用
收藏
页码：2281 / 2289
页数：8
相关论文
共 50 条
  • [31] Microstructure and Mechanical Properties of AA 6061 and AA 7072 Friction Stir Spot Welds Using the Pinless Tool
    Beidokhti, B.
    Khadivi, S.
    Zahmatkesh, M.
    Yazdi, S. Rohani
    Akbari, M. Tavakolian
    PHYSICS OF METALS AND METALLOGRAPHY, 2024, 125 (SUPPL1): : S140 - S147
  • [32] A Novel Tool Design for Friction Stir Spot Welding
    Valant, M.
    Yarrapareddy, E.
    Kovacevic, R.
    TRENDS IN WELDING RESEARCH, PROCEEDINGS, 2006, : 201 - 206
  • [33] Effect of tool geometry on mechanical and microstructural behaviours in dissimilar friction stir welding of AA 5086-AA 6061
    Jamshidi Aval, H.
    Serajzadeh, S.
    Kokabi, A. H.
    Loureiro, A.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2011, 16 (07) : 597 - 604
  • [34] Influence of Welding Parameters and Tool Geometry on the Mechanical Performance of Friction Stir Spot Welded Al-Mg Alloys
    Echeverria, A.
    Zabaleta, A.
    Alvarez, P.
    Aldanondo, E.
    Solis, J.
    da Silva, A. A. M.
    TRENDS IN WELDING RESEARCH, 2009, : 364 - 370
  • [35] Friction stir welding of aluminum alloy with varying tool geometry and process parameters
    Biswas, P.
    Kumar, D. A.
    Mandal, N. R.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2012, 226 (B4) : 641 - 648
  • [36] Methodological approach for best tool geometry determination in friction stir welding process
    Sarma, K. L. N. Sandeepa
    Srikanth, Akella
    Venkateshwarlu, B.
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 7105 - 7114
  • [37] Welding tool and process parameter effects in friction stir welding of aluminum alloys
    Colligan, KJ
    Xu, JD
    Pickens, JR
    FRICTION STIR WELDING AND PROCESSING II, 2003, : 181 - 190
  • [38] Effects of tool geometry and process conditions on material flow and strength of friction stir spot welded joint
    Horie S.
    Shinozaki K.
    Yamamoto M.
    Kadoi K.
    North T.H.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2011, 29 (03): : 119s - 123s
  • [39] Hole inhibition mechanisms of Mg/steel lap joint by pinless friction stir spot welding
    Li, Tao-tao
    Ding, Hong-de
    Li, Rui-feng
    Qi, Kai
    Liu, Zhen-guang
    Zhang, Xiao-qiang
    Zhao, Yue
    Qiao, Lei
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2024,
  • [40] The influence of stirrer geometry on bonding and mechanical properties in friction stir welding process
    Boz, M
    Kurt, A
    MATERIALS & DESIGN, 2004, 25 (04) : 343 - 347
12345