Investigations of the Mechanical and Microstructural Effects of Pinless Tool Geometry on Friction Stir Spot Welding Process

被引：0
|
作者：
Hande Güler Özgül
Orhan Dedeoğlu
机构：
[1] Uludag University,Department of Automotive Engineering, Faculty of Engineering
[2] Uludag University,Department of Automotive Engineering, Graduate School of Natural and Applied Sciences
来源：
Transactions of the Indian Institute of Metals | 2020年 / 73卷
关键词：
Friction stir spot welding; Aluminum alloys; Hardness; Shear force;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study, mechanical properties, macrostructure and microstructure of the friction stir spot weld joints were investigated under the influence of pinless tool geometry and different rotation speed parameters (1350, 1850 and 2530 rpm) using Al5754 plates. Tensile shear strength tests were carried out for joints of different process parameters, and fracture surfaces were inspected by scanning electron microscopy; in addition, fracture modes of the joints were also evaluated. According to the results, the maximum strength values were obtained at 1850 rpm rotation speed, and ductile and brittle fractures were observed together.
引用
收藏
页码：2281 / 2289
页数：8
相关论文
共 50 条
  • [1] Investigations of the Mechanical and Microstructural Effects of Pinless Tool Geometry on Friction Stir Spot Welding Process
    Ozgul, Hande Guler
    Dedeoglu, Orhan
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (09) : 2281 - 2289
  • [2] Effects of Tool Plunging Path on the Welded Joint Properties of Pinless Friction Stir Spot Welding
    Ge, Xiaole
    Jiang, Di
    Song, Weiwei
    Wang, Hongfeng
    LUBRICANTS, 2023, 11 (03)
  • [3] The application of a pinless tool in friction stir spot welding: an experimental and numerical study
    Cox, Chase D.
    Aguilar, Jason R.
    Ballun, Marjorie C.
    Strauss, Alvin M.
    Cook, George E.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2014, 228 (11) : 1359 - 1370
  • [4] Friction stir spot welding thin acrylonitrile butadiene styrene sheets using pinless tool
    Shen, Yifu (yfshen_nuaa@hotmail.com), 1600, Springer London (97): : 5 - 8
  • [5] Friction stir spot welding thin acrylonitrile butadiene styrene sheets using pinless tool
    Yinfei Yan
    Yifu Shen
    Wentao Hou
    Junping Li
    The International Journal of Advanced Manufacturing Technology, 2018, 97 : 2749 - 2755
  • [6] Friction stir spot welding thin acrylonitrile butadiene styrene sheets using pinless tool
    Yan, Yinfei
    Shen, Yifu
    Hou, Wentao
    Li, Junping
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (5-8): : 2749 - 2755
  • [7] Pinless friction stir spot welding of aluminium alloy with copper interlayer
    Abed, Balsam H.
    Salih, Omar S.
    Sowoud, Khalid M.
    OPEN ENGINEERING, 2020, 10 (01): : 804 - 813
  • [8] Effect of tool geometry on friction stir spot welding of polypropylene sheets
    Bilici, M. K.
    EXPRESS POLYMER LETTERS, 2012, 6 (10): : 805 - 813
  • [9] Effect of the tool rotation direction on the joint properties of the pinless friction stir spot welding of pure copper
    Ge, Xiaole
    Kolupaev, I. N.
    Jiang, Di
    Wang, Hongfeng
    Cao, Shouzhen
    Liu, Shengrong
    FERROELECTRICS, 2023, 615 (01) : 396 - 406
  • [10] Pre-hole friction stir spot welding of dual-phase steels and comparison with resistance spot welding, conventional and pinless friction stir spot welding
    Vincenzo Lunetto
    Manuela De Maddis
    Pasquale Russo Spena
    The International Journal of Advanced Manufacturing Technology, 2023, 129 : 2333 - 2349
12345