Optimization of the Carbosilicothermic Synthesis of the Ti4SiC3 MAX Phase

被引：0
|
作者：
E. I. Istomina
P. V. Istomin
A. V. Nadutkin
V. E. Grass
A. S. Bogdanova
机构：
[1] Russian Academy of Sciences,Institute of Chemistry, Komi Scientific Center, Ural Branch
[2] Syktyvkar State University,undefined
来源：
Inorganic Materials | 2018年 / 54卷
关键词：
MAX phase; Ti; SiC; Ti; SiC; titanium dioxide; TiC; carbothermic reduction; silicothermic reduction;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
We have studied the formation of the Ti4SiC3 MAX phase during the vacuum carbosilicothermic reduction of TiO2 with a combined reducing agent consisting of SiC and elemental Si and analyzed the effects of the synthesis temperature, heat treatment time, and percentage of elemental silicon in the starting mixture on the Ti4SiC3 yield. Optimal Ti4SiC3 synthesis conditions are as follows: temperature from 1550 to 1650°C, isothermal holding time of 360 min, and the starting-mixture composition TiO2 + 1.2SiC + 0.6Si. The Ti4SiC3 yield then reaches 92 wt %.
引用
收藏
页码：528 / 536
页数：8
相关论文
共 50 条
  • [41] Synthesis and sintering of Ti3GeC2 MAX phase powders
    Mane, Rahul B.
    Haribabu, Ampolu
    Panigrahi, Bharat B.
    CERAMICS INTERNATIONAL, 2018, 44 (01) : 890 - 893
  • [42] Synthesis of the Ti3SiC2 MAX Phase via Combustion in the TiO2-Mg-Si-C System
    Vershinnikov, V. I.
    Kovalev, D. Yu.
    INORGANIC MATERIALS, 2020, 56 (12) : 1211 - 1216
  • [43] Synthesis of the Ti3SiC2 MAX Phase via Combustion in the TiO2–Mg–Si–C System
    V. I. Vershinnikov
    D. Yu. Kovalev
    Inorganic Materials, 2020, 56 : 1211 - 1216
  • [44] Synthesis of nanolayered Ti3SiC2 MAX phase via infiltration of porous TiC preform produced by the gelcasting process
    Foratirad, H.
    Baharvandi, H. R.
    Maragheh, M. Ghanadi
    MATERIALS LETTERS, 2016, 180 : 219 - 222
  • [45] Biomass-derived nano-laminated Ti3SiC2 MAX phase
    Nou, Changwan
    Kim, Byeong Geun
    Suk, Soo-Young
    Choi, Soon-Mok
    RSC ADVANCES, 2022, 12 (50) : 32552 - 32556
  • [46] The Ti3SiC2 Max Phase Material for Q-Switched Pulse Generation
    Sahib, M. A. A. B.
    Zakaria, Rozalina
    Zulkipli, Nur Farhana
    Rosol, Ahmad H. A.
    Yasin, Moh
    Harun, Sulaiman Wadi
    JOURNAL OF RUSSIAN LASER RESEARCH, 2023, 44 (03) : 296 - 302
  • [47] High performance nanocomposites from Ti3SiC2 MAX phase and phthalonitrile resin
    Derradji, Mehdi
    Henniche, Abdelkhalek
    Wang, Jun
    Dayo, Abdul Qadeer
    Ouyang, Jia-hu
    Liu, Wen-bin
    Medjahed, Aboubakr
    POLYMER COMPOSITES, 2018, 39 (10) : 3705 - 3711
  • [48] Experimental evidence of copper insertion in a crystallographic structure of Ti3SiC2 MAX phase
    Dezellus, Olivier
    Gardiola, Bruno
    Andrieux, Jerome
    Lay, Sabine
    SCRIPTA MATERIALIA, 2015, 104 : 17 - 20
  • [49] The Ti3SiC2 Max Phase Material for Q-Switched Pulse Generation
    M. A. A. B. Sahib
    Rozalina Zakaria
    Nur Farhana Zulkipli
    Ahmad H. A. Rosol
    Moh Yasin
    Sulaiman Wadi Harun
    Journal of Russian Laser Research, 2023, 44 : 296 - 302
  • [50] Assessment of Ti3SiC2 MAX Phase as a Structural Material for High Temperature Receivers
    Barua, Bipul
    Messner, Mark C.
    Singh, Dileep
    SOLARPACES 2020 - 26TH INTERNATIONAL CONFERENCE ON CONCENTRATING SOLAR POWER AND CHEMICAL ENERGY SYSTEMS, 2022, 2445
12345