Synthesis of TiC/NiTi composite powders in molten salt and their sintering

被引：0

作者：

Ruisong Yang

Lishan Cui

Yanjun Zheng

机构：

[1] China University of Petroleum,Department of Materials Science and Engineering

来源：

Journal of Materials Science | 2008年 / 43卷

关键词：

Martensitic Transformation; Differential Scanning Calorimeter; Molten Salt; Composite Powder; NiTi Alloy;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

In this paper, TiC/NiTi composite powders were prepared by putting Ni, Ti and C powders into a molten salt bath. The as-prepared composite powders were then sintered by a cubic high-pressure apparatus to produce bulk composite materials at a very short time. It was found that the composite was composed of TiC particles embedded in NiTi matrix, in which a small amount of Ti2Ni was also detected. The martensitic transformation of the NiTi matrix was evidenced by differential scanning calorimetry analysis.

引用

页码：98 / 101

页数：3

共 50 条

[41] Mechanical alloying of TiC/M2 high speed steel composite powders and sintering investigation
Liu, ZY
Loh, NH
Khor, KA
Tor, SB
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 311 (1-2): : 13 - 21
[42] Microstructure and properties of NiAl/TiC composite synthesized by spark plasma sintering of mechanically activated elemental powders
Zhao, Zhiju
Wang, Chenglin
Yang, Liqin
Cheng, Yanping
Cai, Zhenyu
Mehrizi, M. Zarezadeh
CERAMICS INTERNATIONAL, 2023, 49 (10) : 15710 - 15716
[43] Synthesis of nanostructured MoSi2-TiC composite powders by mechanical alloying
Song, IH
Yun, JY
Jeon, JH
Hahn, YD
Kim, YJ
Ahn, JH
METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, 2003, : 383 - 388
[44] Synthesis and formation mechanism of W/TiC composite powders by a wet chemical route
Tan, Xiao-Yue
Luo, Lai-Ma
Chen, Hong-Yu
Li, Ping
Luo, Guang-Nan
Zan, Xiang
Cheng, Ji-Gui
Wu, Yu Cheng
POWDER TECHNOLOGY, 2015, 280 : 83 - 88
[45] Electrolytic synthesis of TiC/SiC nanocomposites from high titanium slag in molten salt
Zhou, Zhongren
Zhang, Yingjie
Dong, Peng
Hua, Yixin
Zhang, Qibo
Wang, Ding
Duan, Jianguo
Zhang, Zhen
CERAMICS INTERNATIONAL, 2018, 44 (04) : 3596 - 3605
[46] Synthesis of TiC composite by salt route and grain refinement of aluminium alloy
Sharma, A.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2008, 21 (1-4) : 226 - 230
[47] Effect of cobalt on the synthesis and sintering of WC-Co composite powders
Park, Choongkwon
Kim, Jiwoong
Kang, Shinhoo
JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 766 : 564 - 571
[48] Synthesis and characterisation of TiC reinforced CoCrFeNi composite by hot-pressing sintering
Zhang, Guopeng
Wang, Guifang
Yang, Tianhai
Liu, Zhongxia
MATERIALS SCIENCE AND TECHNOLOGY, 2020, 36 (04) : 409 - 416
[49] Synthesis of Ni/TiC composite coating by infiltration sintering of electrophoretic deposited layers
Gorji, M. R.
Edtmaier, C.
Sanjabi, S.
MATERIALS & DESIGN, 2017, 125 : 167 - 179
[50] Effect of mixing condition of elemental powders on synthesis of TiC phase and consolidation by pressure sintering method
Isonishi K.
Takei S.
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2019, 66 (06): : 282 - 287

← 1 2 3 4 5 →