Torsion Of Solid Rods with Account for the Different Resistance of the Material to Tension and Compression Under Creep

被引:0
|
作者
I. A. Banshchikova
A. Yu. Larichkin
机构
[1] Russian Academy of Sciences,Lavrent’ev Institute of Hydrodynamics, Siberian Branch
关键词
experiment; creep; different resistance to tension and compression under creep; anisotropy; rod torsion; titanium alloy;
D O I
暂无
中图分类号
学科分类号
摘要
Experiments on tension and compression of solid samples cut out from a 60-mm thick plate of an Ti–Al–Sn–V alloy at a temperature of 700◦C are used to determine that this alloy possesses small anisotropy and a different resistance to tension and compression under creep. The approximations of the power law of creep are obtained for each series of these experiments and each direction in the plate. Two models based on the transformed space of stresses are used to simulate the torsion of solid samples. The models account for the different resistance to tension and compression under creep. A series of experiments are carried out on the torsion of solid round rods cut out in the normal direction of the plate. It is shown that the computational and experimental results satisfactorily agree.
引用
收藏
页码:1067 / 1077
页数:10
相关论文
共 50 条
  • [31] Determination of creep properties under tension and torsion of copper tubular specimens
    V. V. Nazarov
    Inorganic Materials, 2014, 50 : 1514 - 1515
  • [32] Determination of creep properties under tension and torsion of copper tubular specimens
    Nazarov, V. V.
    INORGANIC MATERIALS, 2014, 50 (15) : 1514 - 1515
  • [33] CREEP-TIME RELATIONS FOR POLYSTYRENE UNDER TENSION, BENDING, AND TORSION
    MARIN, J
    CUFF, G
    PROCEEDINGS-AMERICAN SOCIETY FOR TESTING AND MATERIALS, 1949, 49 : 1158 - 1180
  • [34] Modeling the Multicyclic Fatigue Failure of Rods under Symmetrical Tension/Compression
    Yu. M. Kobzar
    International Applied Mechanics, 2022, 58 : 91 - 101
  • [35] Modeling the Multicyclic Fatigue Failure of Rods under Symmetrical Tension/Compression
    Kobzar, Yu M.
    INTERNATIONAL APPLIED MECHANICS, 2022, 58 (01) : 91 - 101
  • [36] A constitutive model taking account of non-symmetric creep behavior in tension and compression
    Kawai, Masamichi
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2002, 68 (01): : 139 - 146
  • [37] BOUSSINESQ PROBLEM FOR A MATERIAL WITH DIFFERENT MODULI IN TENSION AND COMPRESSION
    SPENCE, DA
    MKRTCHIAN, JZ
    QUARTERLY JOURNAL OF MECHANICS AND APPLIED MATHEMATICS, 1977, 30 (NOV): : 449 - 466
  • [38] ANALYSIS OF BENDING OF COMPOSITE PLATES WITH ACCOUNT FOR THE DIFFERENCE IN RESISTANCE TO TENSION AND COMPRESSION
    I. E. Petrakov
    V. M. Sadovskii
    O. V. Sadovskaya
    Journal of Applied Mechanics and Technical Physics, 2021, 62 : 851 - 860
  • [39] ANALYSIS OF BENDING OF COMPOSITE PLATES WITH ACCOUNT FOR THE DIFFERENCE IN RESISTANCE TO TENSION AND COMPRESSION
    Petrakov, I. E.
    Sadovskii, V. M.
    Sadovskaya, O., V
    JOURNAL OF APPLIED MECHANICS AND TECHNICAL PHYSICS, 2021, 62 (05) : 851 - 860
  • [40] Fatigue behavior of pultruded fiberglass tubes under tension, compression and torsion
    Staroverov, Oleg
    Mugatarov, Artur
    Sivtseva, Anastasia
    Strungar, Elena
    Wildemann, Valeriy
    Elkin, Aleksandr
    Sergeichev, Ivan
    FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2024, (69): : 115 - 128