3D Modeling in the Design and Researches of Internal Combustion Engines

被引：0
|
作者：
Yakovenko A.L. [1 ]
Shatrov M.G. [1 ]
Golubkov L.N. [1 ]
Savastenko E.A. [1 ]
Trofimenko Y.V. [1 ]
机构：
[1] Moscow Automobile and Road Construction State Technical University (MADI), Moscow
来源：
Russian Engineering Research | 2022年 / 42卷 / 11期
关键词：
3D modeling; CAD systems; CFD technologies; engine design; internal-combustion engines;
D O I：
10.3103/S1068798X22110247
中图分类号：
学科分类号：
摘要：
Abstract: The use of three-dimensional models of engine components in the design of its systems and mechanisms by numerical methods is considered. The strength of fuel-system components in a diesel engine, intrinsic vibration of housing components, and vibrations of external surfaces and structure-borne noise are calculated by means of AVL EXCITE software, while the hydraulic characteristics of the intake and supercharger system are calculated using FlowVision software. Parameterization may be used in developing three-dimensional models of internal-combustion engines, which, in turn, may be employed in the CAD system for internal-combustion engines developed in the MADI department of heat engineering and automotive engines. © 2022, Allerton Press, Inc.
引用
收藏
页码：1178 / 1181
页数：3
相关论文
共 50 条
  • [41] KNOCK IN INTERNAL COMBUSTION ENGINES
    DOWNS, D
    WALSH, AD
    NATURE, 1949, 163 (4140) : 370 - 371
  • [42] KNOCK IN INTERNAL COMBUSTION ENGINES
    WHEELER, RW
    DOWNS, D
    WALSH, AD
    NATURE, 1948, 162 (4127) : 893 - 894
  • [43] MODELING THE THROTTLE AIRFLOW IN RELATION TO THE LOAD REGULATION IN INTERNAL COMBUSTION ENGINES
    Oprica, Alexandru
    Bica, Marin
    Florescu, Bogdan
    Lay, Beatrice
    Racila, Laurentiu
    Pascu, Ileana
    Dumitru, Ilie
    ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2021, 64 (01): : 417 - 422
  • [44] Computationally efficient modeling of load dynamics in turbocharged internal combustion engines
    Lauren, Mika
    Goswami, Giota
    Lindh, Tuomo
    Sopanen, Jussi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2024,
  • [45] A new modeling approach of pressure waves at the inlet of internal combustion engines
    David Chalet
    Alexandre Mahé
    Jean-Franois Hétet
    Jérme Migaud
    JournalofThermalScience, 2011, 20 (02) : 181 - 188
  • [46] Modeling of reciprocating internal combustion engines for power generation and heat recovery
    Yun, Kyung Tae
    Cho, Heejin
    Luck, Rogelio
    Mago, Pedro J.
    APPLIED ENERGY, 2013, 102 : 327 - 335
  • [47] BRIEF REVIEW AND ANALYSIS OF SIMULATION MODELING EXAMPLES OF INTERNAL COMBUSTION ENGINES
    Medvedev, Valery V.
    Polovinkin, Valery N.
    Gavrilov, Vladimir V.
    MARINE INTELLECTUAL TECHNOLOGIES, 2019, 1 (01): : 110 - 116
  • [48] MEASUREMENT AND MODELING OF HEAT TRANSFERS AT THE WALLS IN INTERNAL-COMBUSTION ENGINES
    TRAPY, J
    REVUE GENERALE DE THERMIQUE, 1981, 20 (233): : 385 - 390
  • [49] A new modeling approach of pressure waves at the inlet of internal combustion engines
    David Chalet
    Alexandre Mahé
    Jean-François Hétet
    Jérôme Migaud
    Journal of Thermal Science, 2011, 20 : 181 - 188
  • [50] Catalytic combustion effects in internal combustion engines
    Jones, RL
    COMBUSTION SCIENCE AND TECHNOLOGY, 1997, 129 (1-6) : 185 - 195
12345