Effect of hot isostatic pressing on cast A357 aluminium alloy with and without SiC particle reinforcement

被引：0
|
作者：
A. Zulfia
H. V. Atkinson
H. Jones
S. King
机构：
[1] University of Sheffield,Department of Engineering Materials, Hadfield Building
[2] Carlisle Cl.,Bodycote HIP Ltd.
来源：
Journal of Materials Science | 1999年 / 34卷
关键词：
Aluminium Alloy; Metal Matrix Composite; Aluminium Casting; Aluminium Casting Alloy; A357 Aluminium Alloy;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effect of Hot Isostatic Pressing (HIPping) treatments on porosity in the aluminium casting alloy A357 and stir-cast A357/15 vol % SiC particulate Metal Matrix Composite has been investigated. Densitometry and image analysis have been used to determine the apparent percentage porosity. Four HIPping temperature profiles have been investigated (103 MPa pressure) and mechanical testing has been carried out by single notch four point bending. The bend strength was increased after HIPping relative to as-received. The optimum HIPping cycle involved HIPping for a short time in the semi-solid region followed by a sustain below the solidus.
引用
收藏
页码：4305 / 4310
页数：5
相关论文
共 50 条
  • [31] SUPERPLASTICITY IN A HIGH STRENGTH POWDER ALUMINIUM ALLOY WITH AND WITHOUT SiC REINFORCEMENT.
    Mahoney, Murray W.
    Ghosh, Amit K.
    Metallurgical transactions. A, Physical metallurgy and materials science, 1987, 18 A (04): : 653 - 661
  • [32] Investigation on hot isostatic pressing and heat treating process for fine grain cast K403 alloy
    Tang, Xin
    Liu, Fa-Xin
    Li, Ai-Lan
    Gai, Qi-Dong
    Han, Mei
    Hangkong Cailiao Xuebao/Journal of Aeronautical Materials, 2003, 23 (SUPPL.): : 45 - 50
  • [33] Effect of hot isostatic pressing on densification, microstructure and nanoindentation behaviour of Mg-SiC nanocomposites
    Huebler, Daniela
    Ghasemi, Alireza
    Riedel, Ralf
    Fleck, Claudia
    Kamrani, Sepideh
    JOURNAL OF MATERIALS SCIENCE, 2020, 55 (24) : 10582 - 10592
  • [34] The effect of hot isostatic pressing on crack initiation, fatigue, and mechanical properties of two cast aluminum alloys
    T. P. Rich
    J. G. Orbison
    R. S. Duncan
    P. G. Olivero
    R. H. Peterec
    Journal of Materials Engineering and Performance, 1999, 8 : 315 - 324
  • [35] Combined Effect of Particle Reinforcement and T6 Heat Treatment on the Compressive Deformation Behavior of an A357 Aluminum Alloy at Room Temperature and at 350 °C
    Hirsch, Sarah Johanna
    Berndt, Nadja
    Grund, Thomas
    Lampke, Thomas
    CRYSTALS, 2024, 14 (04)
  • [36] The effect of hot isostatic pressing on crack initiation, fatigue, and mechanical properties of two cast aluminum alloys
    Rich, TP
    Orbison, JG
    Duncan, RS
    Olivero, PG
    Peterec, RH
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1999, 8 (03) : 315 - 324
  • [37] Effect of hot isostatic pressing on corrosion resistance of Zn-Al-Si alloy coating
    Zhou, Wen-Bin
    Yao, Zheng-Jun
    Wei, Dong-Bo
    Jiang, Qiong
    Luo, Xi-Xi
    Zhu, Jun-Mou
    Feng, Li-Xin
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2013, 23 (10): : 2882 - 2889
  • [38] Hot Isostatic Pressing Temperature Effect on Chromium-Zirconium Copper Alloy Structure and Properties
    Suvorova, A. A.
    Korostelev, A. B.
    Goslavskii, O. V.
    ATOMIC ENERGY, 2021, 130 (05) : 285 - 289
  • [39] Hot Isostatic Pressing Temperature Effect on Chromium-Zirconium Copper Alloy Structure and Properties
    A. A. Suvorova
    A. B. Korostelev
    O. V. Goslavskii
    Atomic Energy, 2021, 130 : 285 - 289
  • [40] The effect of ceramic particulate reinforcement on the creep properties of cast aluminium-SiC composites
    Lim, CS
    Hung, NP
    Loh, NL
    PROCESSING AND FABRICATION OF ADVANCED MATERIALS VI, VOLS 1 & 2, 1998, : 475 - 486
12345